AutoCodesBuick – P2151 Buick

P2151 Buick Code - Cylinder 2 Injector High Control Circuit High Voltage

Quick Answer

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2151 Buick indicates Cylinder 2 Injector High Control Circuit High Voltage.
Common causes
Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 861
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2151 Buick Description

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector high voltage supply circuit is shorted to voltage for greater than 2 s.
OBDII Code P2151 Buick - Cylinder 2 Injector High Control Circuit High Voltage - AutoCodes.com
P2151 Buick Code - Cylinder 2 Injector High Control Circuit High Voltage

What are the Possible Causes of the DTC P2151 Buick?

  • Faulty Fuel Injector 2
  • Fuel Injector 2 harness is open or shorted
  • Fuel Injector 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2151 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2151 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2151 Buick code?

Need more information on how to fix the P2151 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2151 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2151 Buick Code

1. What does the OBDII code P2151 mean on a Buick?

P2151 indicates a high voltage issue in the Cylinder 2 Injector High Control Circuit, suggesting a problem with the fuel injector or its wiring.

2. What are common symptoms of code P2151 in a Buick?

Symptoms may include rough idle, engine misfires, decreased fuel efficiency, poor acceleration, and the check engine light turning on.

3. What causes the P2151 code in a Buick?

Potential causes include a faulty fuel injector, damaged wiring or connectors, issues with the PCM (Powertrain Control Module), or excessive resistance in the circuit.

4. Can I drive my Buick with a P2151 code?

Driving is possible but not recommended, as it can lead to further engine damage, poor performance, and increased emissions.

5. How can I diagnose the P2151 code in my Buick?

Start by inspecting the wiring and connectors for Cylinder 2’s injector, checking for damage or corrosion, and testing the injector’s resistance with a multimeter.

6. How do I fix the P2151 code on my Buick?

Repairs may involve replacing the faulty injector, repairing damaged wiring, cleaning the connectors, or updating/replacing the PCM if necessary.

7. How much does it cost to repair a P2151 code on a Buick?

Repair costs vary but typically range from $150 to $600 depending on whether just the wiring or the injector needs replacement.

8. Can a bad PCM cause the P2151 code in my Buick?

Yes, a malfunctioning PCM can send incorrect signals to the injector, leading to high voltage issues and triggering the P2151 code.

9. What tools are needed to fix the P2151 code in a Buick?

You’ll need an OBDII scanner, a multimeter, and basic hand tools to check wiring, connectors, and the injector’s resistance.

10. How can I prevent the P2151 code from reoccurring in my Buick?

Regular maintenance, including inspecting wiring and connectors for damage and ensuring clean fuel injector operation, can help prevent this code.

Discuss the causes and fixes for P2151 Buick OBDII Code

Code P2151 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play