P2135 2013 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2013 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 2013 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 2013 Nissan Rogue?
- Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor connection
- Faulty Accelerator Pedal Position Sensor
How to Fix the DTC P2135 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 2013 Nissan Rogue code?
Need more information on how to fix the P2135 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2013 Nissan Rogue Code
1. What does the OBDII code P2135 for a 2013 Nissan Rogue indicate?
The code P2135 indicates a Throttle Position Sensor Circuit Range/Performance issue.
2. What are the common symptoms of a P2135 error in a 2013 Nissan Rogue?
Common symptoms include poor acceleration, stalling, rough idling, and potential issues with the vehicle's response to throttle input.
3. What are the possible causes of the P2135 code in a 2013 Nissan Rogue?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the electronic throttle control system.
4. How can I diagnose the P2135 code in my 2013 Nissan Rogue?
Diagnosing the P2135 code typically involves checking the throttle position sensor's voltage readings, inspecting the sensor and its wiring for damage, and testing the electronic throttle control system for any faults.
5. Can I continue driving my 2013 Nissan Rogue with the P2135 code present?
It is not recommended to drive your vehicle with the P2135 code as it can lead to further damage and potentially unsafe driving conditions.
6. How can I repair the P2135 code in my 2013 Nissan Rogue?
Repairing the P2135 code may involve replacing the throttle position sensor, repairing damaged wiring or connectors, or addressing any issues with the electronic throttle control system.
7. Is it possible to reset the P2135 code in a 2013 Nissan Rogue without fixing the underlying issue?
While you can clear the error code, it is crucial to address the root cause of the problem to prevent the code from reappearing and ensure the vehicle's proper functionality.
8. Can a DIY enthusiast fix the P2135 code in a 2013 Nissan Rogue?
Depending on your skills and experience, you may be able to diagnose and repair the P2135 code yourself, but it is recommended to seek professional help for accurate diagnosis and proper repair.
9. How much does it typically cost to fix the P2135 code in a 2013 Nissan Rogue?
The cost of fixing the P2135 code can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $100 to $500 or more.
10. Will fixing the P2135 code improve the performance and fuel efficiency of my 2013 Nissan Rogue?
Yes, addressing the P2135 code can help restore proper throttle response, improve engine performance, and potentially enhance fuel efficiency in your 2013 Nissan Rogue.
Discuss the causes and fixes for P2135 2013 Nissan Rogue OBDII Code
Code P2135 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
