P2135 2010 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2010 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 2010 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 2010 Nissan Rogue?
- Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor connection
- Faulty Accelerator Pedal Position Sensor
How to Fix the DTC P2135 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 2010 Nissan Rogue code?
Need more information on how to fix the P2135 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P2135 in a 2010 Nissan Rogue?
- Common symptoms include issues with acceleration, reduced engine power, stalling, and the vehicle going into limp mode.
2. What does the OBDII code P2135 indicate in a 2010 Nissan Rogue?
- P2135 indicates a problem with the Throttle Position Sensor (TPS) circuit range or performance in the 2010 Nissan Rogue.
3. What are the possible causes of OBDII code P2135 in a 2010 Nissan Rogue?
- Potential causes include a faulty TPS, damaged wiring or connectors in the TPS circuit, a dirty throttle body, or issues with the electronic throttle control system.
4. How can I diagnose the OBDII code P2135 in my 2010 Nissan Rogue?
- Proper diagnosis involves checking the TPS for proper voltage signals, inspecting wiring for damage, and scanning the vehicle's computer for related trouble codes.
5. Can I drive my 2010 Nissan Rogue with OBDII code P2135?
- It is not recommended to drive with P2135 as it can lead to unsafe driving conditions and potential damage to the vehicle. Seek professional diagnosis and repair.
6. How can I repair OBDII code P2135 in my 2010 Nissan Rogue?
- Repair options may include replacing the TPS, repairing damaged wiring or connectors, cleaning the throttle body, or addressing issues with the electronic throttle control system.
7. Will resetting the OBDII code P2135 in my 2010 Nissan Rogue fix the issue?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing P2135. Proper diagnosis and repair are necessary.
8. Is it possible to prevent OBDII code P2135 in a 2010 Nissan Rogue?
- Regular maintenance, such as cleaning the throttle body and checking TPS connections, can help prevent issues leading to code P2135 in a 2010 Nissan Rogue.
9. How much does it cost to repair OBDII code P2135 in a 2010 Nissan Rogue?
- The cost of repair can vary depending on the specific issue causing P2135. Costs may include parts and labor for TPS replacement, wiring repairs, or throttle body cleaning.
10. Can a DIY enthusiast fix OBDII code P2135 in a 2010 Nissan Rogue?
- While some simple tasks like cleaning the throttle body may be DIY-friendly, diagnosing and repairing complex issues related to P2135 may require professional expertise and tools.
Discuss the causes and fixes for P2135 2010 Nissan Rogue OBDII Code
Code P2135 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
