P2135 2007 Nissan Maxima Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2007 Nissan Maxima indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 2007 Nissan Maxima Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 2007 Nissan Maxima?
- Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor connection
- Faulty Accelerator Pedal Position Sensor
How to Fix the DTC P2135 2007 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 2007 Nissan Maxima code?
Need more information on how to fix the P2135 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2007 Nissan Maxima Code
1. What are the common symptoms of OBDII code P2135 in a 2007 Nissan Maxima?
- The common symptoms include a loss of power, engine stalling, rough idle, and the vehicle going into "limp mode."
2. What causes the OBDII code P2135 in a 2007 Nissan Maxima?
- The most common cause is a faulty throttle position sensor (TPS) or a problem with the wiring/connectors related to the TPS circuit.
3. How can I diagnose the throttle position sensor circuit range/performance issue in my 2007 Nissan Maxima?
- You can use a diagnostic scanner to read the OBDII code P2135 and perform a thorough inspection of the TPS and its wiring for any visible damage.
4. Can a dirty throttle body cause the P2135 code in a 2007 Nissan Maxima?
- Yes, a dirty or faulty throttle body can affect the TPS readings and trigger the P2135 code. It's recommended to clean the throttle body as part of the troubleshooting process.
5. What are some repair tips for fixing the throttle position sensor circuit range/performance issue in a 2007 Nissan Maxima?
- Repair tips include replacing the faulty TPS, repairing any damaged wiring/connectors, resetting the ECU, and performing a throttle body cleaning.
6. Is it safe to continue driving my 2007 Nissan Maxima with the P2135 code?
- It's not recommended to drive the vehicle with the P2135 code as it can lead to further damage and safety risks due to potential loss of power or engine stalling.
7. How much does it typically cost to repair the throttle position sensor circuit range/performance issue in a 2007 Nissan Maxima?
- The cost of repair can vary depending on the extent of the issue and whether you choose to DIY or take it to a mechanic. On average, the cost can range from $100 to $300 for parts and labor.
8. Can resetting the OBDII code P2135 in a 2007 Nissan Maxima fix the issue?
- Resetting the code may temporarily clear the warning light, but it won't fix the underlying problem causing the P2135 code. It's important to diagnose and repair the issue to prevent it from recurring.
9. Will the P2135 code cause my 2007 Nissan Maxima to fail an emissions test?
- Yes, the P2135 code can cause your vehicle to fail an emissions test, as it indicates a problem with the throttle position sensor circuit, which is essential for proper engine performance.
10. How long does it typically take to repair the throttle position sensor circuit range/performance issue in a 2007 Nissan Maxima?
- The repair process can take anywhere from 1 to 3 hours, depending on the complexity of the issue and whether additional diagnostics or parts replacement are needed.
Discuss the causes and fixes for P2135 2007 Nissan Maxima OBDII Code
Code P2135 2007 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
