AutoCodes – Ford – P2132 2011 Ford Fusion

P2132 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2132 2011 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,929

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2132 2011 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 3 is out of self-test range low.

OBDII Code P2132 2011 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low - AutoCodes.com — P2132 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2132 2011 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2132 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2132 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2132 2011 Ford Fusion code?

Need more information on how to fix the P2132 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2132 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2132 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P2132 in a 2011 Ford Fusion?

- Common symptoms include a decrease in engine power, poor acceleration, rough idling, and possibly even stalling.

2. What does the OBDII code P2132 'Throttle/Pedal Position Sensor/Switch 'F' Circuit Low' indicate in a 2011 Ford Fusion?

- This code indicates that the voltage signal from the throttle or pedal position sensor/switch 'F' circuit is lower than expected.

3. What are the potential causes of OBDII code P2132 in a 2011 Ford Fusion?

- Possible causes include a faulty throttle pedal position sensor, issues with the wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the OBDII code P2132 in my 2011 Ford Fusion?

- Diagnostic steps may involve checking the throttle pedal position sensor's wiring and connectors for damage, testing the sensor's voltage output, and scanning the ECM for related fault codes.

5. Can I drive my 2011 Ford Fusion with OBDII code P2132?

- It is not recommended to drive your vehicle with this code as it may lead to unsafe driving conditions due to potential power loss or erratic throttle response.

6. How can I repair OBDII code P2132 in my 2011 Ford Fusion?

- Repair options may include replacing the faulty throttle pedal position sensor, repairing any damaged wiring or connectors, or reprogramming the ECM if necessary.

7. Will resetting the OBDII code P2132 in my 2011 Ford Fusion make it go away permanently?

- Simply resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle.

8. Can a DIY enthusiast fix OBDII code P2132 in a 2011 Ford Fusion?

- While some basic diagnostic steps can be performed by a DIY enthusiast, repairing or replacing components like the throttle pedal position sensor may require advanced tools and expertise.

9. How much does it cost to repair OBDII code P2132 in a 2011 Ford Fusion at a dealership?

- The cost of repairs for this code can vary depending on the exact cause, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Is OBDII code P2132 a common issue in 2011 Ford Fusion vehicles?

- While not extremely common, issues related to throttle or pedal position sensors can occur in various Ford vehicles, including the 2011 Fusion, leading to the triggering of code P2132.