P2128 2009 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 2009 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'E' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2128 2009 Toyota Camry Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2128 2009 Toyota Camry?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2128 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2128 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2128 2009 Toyota Camry code?
Need more information on how to fix the P2128 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 2009 Toyota Camry Code
What does the OBDII code P2128 mean for a 2009 Toyota Camry?
The OBDII code P2128 indicates that the Throttle Pedal Position Sensor/Switch 'E' Circuit Input is reading high, which means the sensor is detecting a higher voltage than expected.
What symptoms might indicate a P2128 code in my 2009 Toyota Camry?
Common symptoms include reduced engine performance, erratic acceleration, the check engine light being illuminated, and possible limp mode activation.
What could cause the P2128 code to trigger in my Toyota Camry?
Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the circuit, issues with the engine control module (ECM), or problems with the accelerator pedal assembly.
How can I diagnose the P2128 code in my 2009 Camry?
You can start by checking the throttle pedal position sensor and its wiring for any visible damage. Use a multimeter to test the sensor's voltage output and compare it to the manufacturer specifications.
What repairs are typically needed to fix a P2128 code?
Repairs may involve replacing the throttle pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if it is found to be faulty.
Can I drive my 2009 Toyota Camry with a P2128 code?
While it may be possible to drive the vehicle, it is not recommended as it can lead to reduced performance and potential safety issues. Addressing the code promptly is advisable.
How much might it cost to repair a P2128 code?
Repair costs can vary widely depending on the specific issue, but replacing a throttle pedal position sensor generally ranges from $100 to $300, including parts and labor.
Will clearing the P2128 code fix the problem permanently?
Clearing the code may temporarily turn off the check engine light, but if the underlying issue is not resolved, the code will likely return.
Is there a chance that the P2128 code is a false positive?
Yes, a false positive can occur due to intermittent wiring issues or a faulty ECM, but these cases are less common. Proper diagnostics are essential to confirm the actual problem.
Discuss the causes and fixes for P2128 2009 Toyota Camry OBDII Code
Code P2128 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
