AutoCodes – Dodge – P2127 Dodge

P2127 Dodge Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Faulty Throttle Body Assembly, Accelerator Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 Dodge indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Faulty Throttle Body Assembly, Accelerator Pedal Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 34,419

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 11, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 Dodge Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 2 is out of self-test range low.

OBDII Code P2127 Dodge - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low - AutoCodes.com — P2127 Dodge Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2127 Dodge?

Faulty Accelerator Pedal Position (APP) Sensor
Faulty Throttle Body Assembly
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2127 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 Dodge code?

Need more information on how to fix the P2127 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 Dodge Code

1. What are common symptoms of OBDII code P2127 in a Dodge related to the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and illuminated Check Engine Light.

2. What are the potential causes of OBDII code P2127 in a Dodge?

- The code P2127 in a Dodge can be caused by a faulty throttle position sensor, damaged wiring or connectors, or issues with the throttle body.

3. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low issue in my Dodge?

- Diagnosing the issue involves using an OBDII scanner to read the code, checking the throttle position sensor's wiring and connections, and conducting voltage tests on the sensor.

4. Can I drive my Dodge with OBDII code P2127 present?

- It is not recommended to drive your Dodge with the P2127 code present, as it can lead to potential safety hazards and further damage to the engine.

5. How can I repair OBDII code P2127 related to the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low in my Dodge?

- Repairing the issue may involve replacing the throttle position sensor, repairing damaged wiring or connectors, or cleaning the throttle body to ensure proper functionality.

6. Is it necessary to reset the OBDII code P2127 after repairing the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low issue in my Dodge?

- Yes, it is important to reset the code using an OBDII scanner after repairing the issue to clear the Check Engine Light and ensure proper detection of any new problems.

7. How much does it typically cost to repair OBDII code P2127 in a Dodge?

- The cost of repairing the P2127 code in a Dodge can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Can a DIY enthusiast fix OBDII code P2127 in a Dodge?

- Depending on your experience and access to tools, a DIY enthusiast may be able to address the P2127 code by replacing the throttle position sensor or repairing wiring issues.

9. Are there any preventive maintenance tips to avoid OBDII code P2127 in a Dodge?

- Regularly inspecting and cleaning the throttle body, checking the throttle position sensor's connections, and addressing any engine performance issues promptly can help prevent the P2127 code.