P2127 2018 Chevrolet Silverado Code - Accelerator Pedal Position Sensor 2 Circuit Low Voltage
Quick Answer
The Accelerator Pedal Assembly contains 2 Accelerator Pedal Position (APP) sensors. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2127 2018 Chevrolet Silverado indicates Accelerator Pedal Position Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2127 2018 Chevrolet Silverado Description
Both the APP sensors 1 and 2 signal percentages increase as the pedal is depressed, from approximately 0 percent at rest to above 95 percent when fully depressed.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the APP sensor 2 voltage is less than 0.32 V for less than 1 s.
What are the Possible Causes of the DTC P2127 2018 Chevrolet Silverado?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2127 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2127 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2127 2018 Chevrolet Silverado code?
Need more information on how to fix the P2127 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2127 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2127 2018 Chevrolet Silverado Code
1. What does the OBDII code P2127 mean on a 2018 Chevrolet Silverado?
P2127 indicates a low voltage issue in Accelerator Pedal Position Sensor 2 Circuit, which monitors the position of the accelerator pedal.
2. What are the symptoms of code P2127 in a 2018 Chevrolet Silverado?
Common symptoms include reduced engine power, poor acceleration, difficulty starting, or the vehicle entering "limp mode."
3. What causes the P2127 code on a 2018 Chevrolet Silverado?
Causes include a faulty accelerator pedal position sensor, damaged wiring or connectors, or issues with the throttle control system.
4. Can I drive my 2018 Chevrolet Silverado with the P2127 code?
While the vehicle may still operate, driving with this code can result in reduced engine performance and may lead to unsafe driving conditions.
5. How do you diagnose the P2127 code in a 2018 Chevrolet Silverado?
Diagnosing involves using a scan tool to read live data, inspecting the accelerator pedal position sensor, checking the wiring and connectors, and testing the circuit for proper voltage.
6. How do you fix the P2127 code on a 2018 Chevrolet Silverado?
Repairs may involve replacing the accelerator pedal position sensor, repairing damaged wiring or connectors, or addressing throttle body issues.
7. How much does it cost to fix the P2127 code on a 2018 Chevrolet Silverado?
The cost depends on the repair needed. Replacing the accelerator pedal position sensor typically costs $100–$300, including parts and labor.
8. Can a dirty throttle body cause the P2127 code on a 2018 Chevrolet Silverado?
While uncommon, a dirty throttle body may contribute to throttle control issues that could indirectly cause the code.
9. Does the P2127 code always mean the accelerator pedal position sensor is faulty?
No, the issue could be caused by wiring problems, poor connections, or other related components in the circuit.
10. Do I need to clear the P2127 code after repairs on a 2018 Chevrolet Silverado?
Yes, clearing the code with an OBDII scanner after repairs ensures the system resets and allows you to confirm the issue is resolved.
Discuss the causes and fixes for P2127 2018 Chevrolet Silverado OBDII Code
Code P2127 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
