AutoCodes – Toyota – P2127 2014 Toyota RAV4

P2127 2014 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2014 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 289

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2014 Toyota RAV4 Description

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). This sensor is a non-contact type sensor and uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The voltage, which is applied to terminals VPA and VPA2 of the Engine Control Module (ECM), varies between 0.5 V and 4.75 V in proportion to the operating angle of the accelerator pedal (throttle valve). A signal from VPA indicates the actual accelerator pedal opening angle (throttle valve opening angle) and is used for engine control. A signal from VPA2 conveys the status of the VPA circuit and is used to check the accelerator pedal position sensor itself.
The ECM monitors the actual accelerator pedal opening angle (throttle valve opening angle) through the signals from VPA and VPA2 and controls the throttle actuator according to these signals.
When either the output voltage of VPA or VPA2 deviates from the standard range, or the difference between the output voltages of the 2 sensor circuits is more than the threshold, the ECM determines that there is a malfunction in the accelerator pedal position sensor. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P2127 2014 Toyota RAV4 - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low - AutoCodes.com — P2127 2014 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low

What does this mean?

What are the Possible Causes of the DTC P2127 2014 Toyota RAV4?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2014 Toyota RAV4 code?

Need more information on how to fix the P2127 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2014 Toyota RAV4 Code

1. What are common symptoms of OBDII code P2127 in a 2014 Toyota RAV4?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low mean?

- This code indicates that the voltage signal from the throttle pedal position sensor 'E' is lower than expected by the engine control module.

3. What are possible causes of the P2127 code in a 2014 Toyota RAV4?

- Potential causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.

4. How can I diagnose the P2127 code in my 2014 Toyota RAV4?

- Diagnose the code by checking the throttle pedal position sensor for proper operation, inspecting the wiring and connectors for damage, and using a scan tool to monitor sensor data.

5. Can I drive my Toyota RAV4 with the P2127 code?

- It is not recommended to drive the vehicle with the P2127 code present, as it can lead to unsafe driving conditions and potential further damage to the engine.

6. How can I repair the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low code?

- Repair options include replacing the throttle pedal position sensor, repairing damaged wiring or connectors, and resetting the engine control module after fixing the issue.

7. Is it safe to continue driving if the P2127 code disappears on its own?

- Even if the code disappears, it is still advisable to diagnose and repair the underlying issue to prevent potential recurrence and ensure safe vehicle operation.

8. Can a DIY enthusiast fix the P2127 code in a 2014 Toyota RAV4?

- While some simple checks like inspecting connectors can be done by DIYers, diagnosing and repairing complex issues related to the throttle pedal position sensor may require professional help.

9. How much does it cost to repair the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low code?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Will resetting the trouble codes make the P2127 code go away permanently?

- Resetting the trouble codes may temporarily clear the P2127 code, but if the underlying issue is not addressed, the code is likely to reappear after driving the vehicle again.