AutoCodes – Nissan – P2127 2010 Nissan Altima Sedan

P2127 2010 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2010 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,790

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2010 Nissan Altima Sedan Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2010 Nissan Altima Sedan - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2010 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2010 Nissan Altima Sedan?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2010 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2010 Nissan Altima Sedan code?

Need more information on how to fix the P2127 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2010 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P2127 in a 2010 Nissan Altima Sedan?

The common symptoms of code P2127 include issues with acceleration, reduced engine power, and the vehicle going into a limp mode.

2. What does OBDII code P2127 indicate in a 2010 Nissan Altima Sedan?

Code P2127 indicates a problem with the Accelerator Pedal Position Sensor Circuit in the vehicle.

3. What are the possible causes of OBDII code P2127 in a 2010 Nissan Altima Sedan?

Possible causes of code P2127 include a faulty accelerator pedal position sensor, wiring issues, or a poor connection in the sensor circuit.

4. How can I diagnose the issue related to OBDII code P2127 in my 2010 Nissan Altima Sedan?

Diagnosing the issue involves checking the wiring and connections related to the accelerator pedal position sensor, testing the sensor itself, and using a diagnostic scanner to read the code and data.

5. Can I continue driving my 2010 Nissan Altima Sedan with OBDII code P2127?

It is not recommended to continue driving the vehicle with code P2127 present, as it can lead to further damage and safety concerns due to potential acceleration issues.

6. How can I repair OBDII code P2127 in my 2010 Nissan Altima Sedan?

Repairing code P2127 may involve replacing the accelerator pedal position sensor, repairing any damaged wiring or connections, or resetting the code after addressing the underlying issue.

7. Is it possible to reset OBDII code P2127 in a 2010 Nissan Altima Sedan without repairs?

While you can clear the code temporarily, it is essential to diagnose and fix the underlying issue causing code P2127 to prevent it from reoccurring.

8. How much does it typically cost to repair OBDII code P2127 in a 2010 Nissan Altima Sedan?

The cost of repairing code P2127 can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Can a DIY enthusiast resolve OBDII code P2127 in a 2010 Nissan Altima Sedan?

DIY enthusiasts with automotive repair experience may be able to address code P2127 by following repair guides, but it is essential to have the necessary tools and knowledge for working on the sensor circuit.

10. Will OBDII code P2127 in a 2010 Nissan Altima Sedan affect fuel efficiency?

Yes, code P2127 can affect fuel efficiency as it may lead to improper acceleration and engine performance, resulting in increased fuel consumption.