AutoCodes – Nissan – P2127 2007 Nissan Maxima

P2127 2007 Nissan Maxima Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2007 Nissan Maxima indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,186

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2007 Nissan Maxima Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2007 Nissan Maxima - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2007 Nissan Maxima Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2007 Nissan Maxima?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2007 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2007 Nissan Maxima code?

Need more information on how to fix the P2127 2007 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2007 Nissan Maxima Code

1. What are the common symptoms of OBDII code P2127 in a 2007 Nissan Maxima?

- Common symptoms include issues with acceleration, reduced engine power, and the vehicle going into limp mode.

2. What can cause the OBDII code P2127 to occur in a 2007 Nissan Maxima?

- The code P2127 is typically triggered by a faulty accelerator pedal position sensor or issues in the sensor circuit.

3. How can I diagnose the cause of OBDII code P2127 in my 2007 Nissan Maxima?

- Diagnosing the issue involves checking the accelerator pedal position sensor, inspecting the sensor wiring, and testing the sensor circuit for proper voltage.

4. Can a dirty throttle body cause OBDII code P2127 in a 2007 Nissan Maxima?

- While a dirty throttle body can contribute to acceleration issues, OBDII code P2127 specifically relates to the accelerator pedal position sensor circuit.

5. Is it safe to continue driving my 2007 Nissan Maxima with OBDII code P2127?

- It is not recommended to drive the vehicle with code P2127 as it can lead to further damage and safety risks due to the potential loss of engine power.

6. How do I repair OBDII code P2127 in my 2007 Nissan Maxima?

- Repairing code P2127 may involve replacing the accelerator pedal position sensor, repairing wiring issues, or resetting the sensor calibration.

7. Can I reset OBDII code P2127 in my 2007 Nissan Maxima by disconnecting the battery?

- Disconnecting the battery may temporarily clear the code, but it is essential to diagnose and fix the underlying issue to prevent the code from reoccurring.

8. Are there any common recalls or technical service bulletins related to OBDII code P2127 in a 2007 Nissan Maxima?

- It's recommended to check with Nissan dealerships or online resources for any recalls or technical service bulletins related to the accelerator pedal position sensor in the 2007 Maxima.

9. Will OBDII code P2127 cause the check engine light to illuminate in a 2007 Nissan Maxima?

- Yes, code P2127 will typically trigger the check engine light to illuminate on the dashboard of the 2007 Nissan Maxima.

10. How much does it cost to fix OBDII code P2127 in a 2007 Nissan Maxima?

- The cost of fixing code P2127 can vary depending on the specific issue, but it may involve sensor replacement, wiring repairs, or calibration adjustments that can range from $100 to $300 or more.