AutoCodes – Ford – P2127 2007 Ford Fusion

P2127 2007 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2007 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,188

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2007 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 2 is out of self-test range low.

OBDII Code P2127 2007 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low - AutoCodes.com — P2127 2007 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2127 2007 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2127 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2007 Ford Fusion code?

Need more information on how to fix the P2127 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P2127 on a 2007 Ford Fusion?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and illuminated Check Engine light.

2. What can cause the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low code on a 2007 Ford Fusion?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, or a problem with the throttle body.

3. How can I diagnose the P2127 code on my 2007 Ford Fusion?

- Diagnose the code by using an OBDII scanner to retrieve the code and inspecting the throttle position sensor, wiring, and connectors for any visible damage.

4. Can I drive my 2007 Ford Fusion with the P2127 code?

- It is not recommended to drive with the P2127 code as it may lead to unsafe driving conditions and potential further damage to the vehicle.

5. How do I repair the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low code on a 2007 Ford Fusion?

- Repair involves replacing the faulty throttle position sensor, repairing any damaged wiring or connectors, or cleaning/replacing the throttle body if necessary.

6. What are the long-term effects of ignoring the P2127 code on a 2007 Ford Fusion?

- Ignoring the code can lead to continued performance issues, decreased fuel efficiency, and potential damage to other engine components over time.

7. Are there any DIY tips for fixing the P2127 code on a 2007 Ford Fusion?

- DIY tips include checking for loose or damaged connectors, ensuring proper sensor alignment, and following the manufacturer's repair procedures.

8. How much does it cost to fix the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low code on a 2007 Ford Fusion?

- The cost of repair can vary depending on the extent of the issue, but it typically ranges from $100 to $300 for parts and labor.

9. Is the P2127 code a common issue in 2007 Ford Fusion vehicles?

- Yes, the P2127 code related to the throttle position sensor is a common issue in 2007 Ford Fusion vehicles and may require periodic maintenance.

10. Can resetting the OBDII code P2127 on a 2007 Ford Fusion fix the problem temporarily?

- Resetting the code may temporarily clear the Check Engine light, but it will not fix the underlying issue causing the Throttle/Pedal Position Sensor/Switch 'E' Circuit Low code.