AutoCodes – Nissan – P2127 2006 Nissan Maxima

P2127 2006 Nissan Maxima Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2006 Nissan Maxima indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,657

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2006 Nissan Maxima Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2006 Nissan Maxima - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2006 Nissan Maxima Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2006 Nissan Maxima?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2006 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2006 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2006 Nissan Maxima code?

Need more information on how to fix the P2127 2006 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2006 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2006 Nissan Maxima Code

1. What are the common symptoms of OBDII code P2127 in a 2006 Nissan Maxima?

The common symptoms of OBDII code P2127 in a 2006 Nissan Maxima include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into "limp mode."

2. What causes the OBDII code P2127 in a 2006 Nissan Maxima?

The OBDII code P2127 in a 2006 Nissan Maxima is typically caused by a faulty accelerator pedal position sensor or a problem in the accelerator pedal position sensor circuit.

3. How do I diagnose the OBDII code P2127 in a 2006 Nissan Maxima?

To diagnose the OBDII code P2127 in a 2006 Nissan Maxima, you can use a scan tool to read the code and check the voltage output of the accelerator pedal position sensor. Additionally, inspect the wiring and connections for any damage or corrosion.

4. Can I still drive my 2006 Nissan Maxima with the OBDII code P2127?

It is not recommended to drive your 2006 Nissan Maxima with the OBDII code P2127, as it can lead to unsafe driving conditions due to reduced engine power and potential stalling.

5. How do I repair the OBDII code P2127 in a 2006 Nissan Maxima?

To repair the OBDII code P2127 in a 2006 Nissan Maxima, you may need to replace the accelerator pedal position sensor or repair any damaged wiring or connections in the sensor circuit.

6. Will resetting the OBDII code P2127 in a 2006 Nissan Maxima fix the issue?

Resetting the OBDII code P2127 in a 2006 Nissan Maxima may temporarily clear the warning light, but it will not fix the underlying issue causing the code. It is important to diagnose and repair the problem to prevent further issues.

7. How much does it cost to fix the OBDII code P2127 in a 2006 Nissan Maxima?

The cost to fix the OBDII code P2127 in a 2006 Nissan Maxima can vary depending on the root cause of the issue. Replacing the accelerator pedal position sensor or repairing wiring may cost a few hundred dollars including parts and labor.

8. Can a DIY enthusiast fix the OBDII code P2127 in a 2006 Nissan Maxima?

A DIY enthusiast with automotive repair experience may be able to fix the OBDII code P2127 in a 2006 Nissan Maxima by following the proper diagnostic procedures and replacing the faulty components.

9. How often does the OBDII code P2127 occur in a 2006 Nissan Maxima?

The OBDII code P2127 in a 2006 Nissan Maxima can occur due to wear and tear on the accelerator pedal position sensor or issues with the sensor circuit, but the frequency can vary depending on driving conditions and maintenance.

10. Is it safe to ignore the OBDII code P2127 in a 2006 Nissan Maxima?

It is not safe to ignore the OBDII code P2127 in a 2006 Nissan Maxima, as it can lead to potential safety hazards such as loss of engine power or stalling while driving. It is recommended to diagnose and repair the issue promptly.