P2123 2007 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2007 Nissan Sentra indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2007 Nissan Sentra Description
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
What are the Possible Causes of the DTC P2123 2007 Nissan Sentra?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P2123 2007 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2007 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2007 Nissan Sentra code?
Need more information on how to fix the P2123 2007 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2007 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2007 Nissan Sentra Code
1. What does the OBDII code P2123 mean on a 2007 Nissan Sentra?
P2123 indicates an issue with the Accelerator Pedal Position (APP) Sensor Circuit, specifically that the sensor's voltage is out of the expected range or showing performance problems.
2. What are the common symptoms of P2123 in a 2007 Nissan Sentra?
Symptoms may include reduced engine performance, the throttle not responding properly, a lack of acceleration, and the check engine light being illuminated.
3. What causes the P2123 code to appear in a 2007 Nissan Sentra?
Common causes include a faulty APP sensor, damaged or corroded wiring in the APP circuit, a malfunctioning throttle body, or a failing engine control module (ECM).
4. Can I drive my 2007 Nissan Sentra with the P2123 code?
Driving with this code is not recommended, as it can result in poor throttle response, limited acceleration, or even the vehicle entering "limp mode," which could be unsafe.
5. How do I diagnose the P2123 code on my 2007 Nissan Sentra?
Diagnosis typically involves using a scan tool to check live data from the APP sensor, inspecting the wiring and connectors for damage, and testing the sensor's voltage output to ensure it’s within the expected range.
6. How do I fix the P2123 code on a 2007 Nissan Sentra?
Repairs may include replacing the APP sensor, repairing or replacing damaged wiring, cleaning or replacing the throttle body, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to repair the P2123 code on a 2007 Nissan Sentra?
Repair costs vary but typically range from $100 to $300 for an APP sensor replacement, plus potential additional costs for wiring repairs or ECM work.
8. What tools are needed to troubleshoot the P2123 code on a 2007 Nissan Sentra?
You will need an OBDII scanner to read and clear codes, a multimeter to test voltage, and possibly a wiring diagram for the APP circuit.
9. Can a dirty throttle body cause the P2123 code on a 2007 Nissan Sentra?
Yes, a dirty or malfunctioning throttle body can cause issues with the APP sensor circuit and may trigger the P2123 code.
10. Does the P2123 code always mean the APP sensor is faulty on a 2007 Nissan Sentra?
No, the code can also be caused by wiring issues, throttle body problems, or a malfunctioning ECM, so thorough diagnosis is important before replacing parts.
Discuss the causes and fixes for P2123 2007 Nissan Sentra OBDII Code
Code P2123 2007 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
