AutoCodes – Toyota – P2122 2013 Toyota RAV4

P2122 2013 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2122 2013 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 257

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2122 2013 Toyota RAV4 Description

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). This sensor is a non-contact type sensor and uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The voltage, which is applied to terminals VPA and VPA2 of the Engine Control Module (ECM), varies between 0.5 V and 4.75 V in proportion to the operating angle of the accelerator pedal (throttle valve). A signal from VPA indicates the actual accelerator pedal opening angle (throttle valve opening angle) and is used for engine control. A signal from VPA2 conveys the status of the VPA circuit and is used to check the accelerator pedal position sensor itself.
The ECM monitors the actual accelerator pedal opening angle (throttle valve opening angle) through the signals from VPA and VPA2 and controls the throttle actuator according to these signals.
When either the output voltage of VPA or VPA2 deviates from the standard range, or the difference between the output voltages of the 2 sensor circuits is more than the threshold, the ECM determines that there is a malfunction in the accelerator pedal position sensor. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P2122 2013 Toyota RAV4 - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low - AutoCodes.com — P2122 2013 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low

What does this mean?

What are the Possible Causes of the DTC P2122 2013 Toyota RAV4?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2122 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2122 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2122 2013 Toyota RAV4 code?

Need more information on how to fix the P2122 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2122 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2122 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2122 in a 2013 Toyota RAV4?

The common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the OBDII code P2122 in a 2013 Toyota RAV4 mean?

The code P2122 indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low in the vehicle's electronic throttle control system.

3. What are the possible causes of OBDII code P2122 in a 2013 Toyota RAV4?

Potential causes of this code include a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal circuit, or issues with the engine control module.

4. How can I diagnose the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low issue in my 2013 Toyota RAV4?

You can use a scan tool to read the OBDII code P2122 and then inspect the throttle pedal position sensor, wiring connections, and related components for any visible damage.

5. Can I drive my 2013 Toyota RAV4 with OBDII code P2122?

It is not recommended to drive the vehicle with this code as it can lead to unsafe driving conditions due to potential loss of engine power or control.

6. How can I repair OBDII code P2122 in my 2013 Toyota RAV4?

Repair options include replacing the faulty throttle position sensor, repairing damaged wiring or connectors, or resetting the engine control module after addressing the issue.

7. Will resetting the OBDII code P2122 in my 2013 Toyota RAV4 make it go away permanently?

Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear when the problem is detected again.

8. How much does it cost to fix OBDII code P2122 in a 2013 Toyota RAV4?

The cost of fixing this issue can vary depending on the exact cause and whether you perform the repairs yourself or take the vehicle to a mechanic. Costs may include parts and labor charges.

9. Can a DIY enthusiast fix OBDII code P2122 in a 2013 Toyota RAV4?

If you have the necessary tools, knowledge, and experience working on automotive systems, you may be able to diagnose and repair the issue yourself. Otherwise, it's best to seek professional help.

10. How often does OBDII code P2122 occur in a 2013 Toyota RAV4?

The occurrence of this code can vary depending on the vehicle's usage, maintenance, and other factors. If the issue is not addressed promptly, it can lead to further complications in the throttle control system.