P2122 2013 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2013 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2122 2013 Nissan Rogue Description
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
What are the Possible Causes of the DTC P2122 2013 Nissan Rogue?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P2122 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2122 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2122 2013 Nissan Rogue code?
Need more information on how to fix the P2122 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P2122 in a 2013 Nissan Rogue?
The common symptoms of OBDII code P2122 in a 2013 Nissan Rogue include issues with acceleration, reduced engine power, and the vehicle going into "limp mode."
2. What does the OBDII code P2122 mean for a 2013 Nissan Rogue?
OBDII code P2122 in a 2013 Nissan Rogue indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance.
3. What are the possible causes of OBDII code P2122 in a 2013 Nissan Rogue?
Possible causes of OBDII code P2122 in a 2013 Nissan Rogue include a faulty accelerator pedal position sensor, wiring issues, or a problem with the electronic throttle control system.
4. How can I diagnose the OBDII code P2122 in my 2013 Nissan Rogue?
Diagnosing OBDII code P2122 in a 2013 Nissan Rogue involves using a diagnostic scanner to retrieve the code, inspecting the accelerator pedal position sensor and its wiring, and testing the electronic throttle control system for faults.
5. Can I continue driving my 2013 Nissan Rogue with OBDII code P2122?
It is not recommended to continue driving your 2013 Nissan Rogue with OBDII code P2122 as it can lead to further damage to the vehicle and potentially unsafe driving conditions.
6. How can I repair OBDII code P2122 in my 2013 Nissan Rogue?
Repairing OBDII code P2122 in a 2013 Nissan Rogue involves replacing the faulty accelerator pedal position sensor, repairing any damaged wiring, or addressing issues with the electronic throttle control system.
7. Is it possible to reset the OBDII code P2122 in a 2013 Nissan Rogue without fixing the underlying issue?
While you can clear the code using a diagnostic scanner, it will likely reappear until the root cause of the problem, such as a faulty sensor or wiring, is addressed.
8. How much does it typically cost to fix OBDII code P2122 in a 2013 Nissan Rogue?
The cost of fixing OBDII code P2122 in a 2013 Nissan Rogue can vary depending on the specific cause of the issue, but it typically involves parts and labor costs for sensor replacement or wiring repair.
9. Can a DIY enthusiast repair OBDII code P2122 in a 2013 Nissan Rogue?
While some DIY enthusiasts may be able to replace the accelerator pedal position sensor or address wiring issues, diagnosing and repairing electronic throttle control system problems may require more advanced skills and tools.
10. Will OBDII code P2122 cause my 2013 Nissan Rogue to fail an emissions test?
OBDII code P2122 can cause your 2013 Nissan Rogue to fail an emissions test as it indicates a problem with the vehicle's emissions control system. It is recommended to address the issue before attempting an emissions test.
Discuss the causes and fixes for P2122 2013 Nissan Rogue OBDII Code
Code P2122 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
