P2122 2004 Toyota Highlander Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2004 Toyota Highlander indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2122 2004 Toyota Highlander Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2122 2004 Toyota Highlander?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2122 2004 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2122 2004 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2122 2004 Toyota Highlander code?
Need more information on how to fix the P2122 2004 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2004 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2004 Toyota Highlander Code
1. What does the OBDII code P2122 mean on a 2004 Toyota Highlander?
P2122 indicates that the throttle pedal position sensor (TPPS) or switch "D" circuit is reporting a low voltage signal to the powertrain control module (PCM).
2. What are the common symptoms of code P2122 in a 2004 Toyota Highlander?
Symptoms may include reduced engine power (limp mode), unresponsive throttle, poor acceleration, illuminated check engine light, and possible stalling.
3. What causes the P2122 code in a 2004 Toyota Highlander?
Common causes include a faulty throttle pedal position sensor, damaged or corroded wiring, loose connections, or a malfunctioning PCM.
4. Can I drive my 2004 Toyota Highlander with the P2122 code?
It is not recommended to drive with this code as the vehicle may enter limp mode, causing reduced power and difficulty maintaining speed, which could compromise safety.
5. How do I diagnose the P2122 code in my 2004 Toyota Highlander?
Diagnosis involves checking the TPPS for proper operation, inspecting wiring and connectors for damage or corrosion, and using a multimeter to verify sensor voltage.
6. How do I fix the P2122 code on a 2004 Toyota Highlander?
Repairs may include replacing the throttle pedal position sensor, repairing damaged wiring, cleaning corroded connections, or replacing the PCM if necessary.
7. How much does it cost to fix the P2122 code on a 2004 Toyota Highlander?
The repair cost can range from $100 to $300, depending on whether the throttle pedal position sensor or wiring needs repair. Replacing the PCM could cost significantly more.
8. Can a dead battery cause the P2122 code in a 2004 Toyota Highlander?
A dead or weak battery is unlikely to directly cause P2122, but electrical issues from a failing charging system could potentially contribute to voltage irregularities.
9. Does the P2122 code always mean the throttle pedal position sensor is bad?
No, the issue could also stem from wiring faults, loose connections, or a malfunctioning PCM, so proper diagnosis is essential.
10. How can I prevent the P2122 code from reoccurring in my 2004 Toyota Highlander?
Regular maintenance, such as inspecting and cleaning electrical connections, avoiding water intrusion, and addressing wiring issues promptly, can help prevent the code from returning.
Discuss the causes and fixes for P2122 2004 Toyota Highlander OBDII Code
Code P2122 2004 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
