AutoCodesDodge – P2121 Dodge

P2121 Dodge Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2121 Dodge indicates Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance.
Common causes
Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 21,447
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2121 Dodge Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy.
OBDII Code P2121 Dodge - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance - AutoCodes.com
P2121 Dodge Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance

What are the Possible Causes of the DTC P2121 Dodge?

  • Faulty Accelerator Pedal Position (APP) Sensor
  • Accelerator Pedal Position (APP) Sensor harness is open or shorted
  • Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2121 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2121 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2121 Dodge code?

Need more information on how to fix the P2121 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2121 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2121 Dodge Code

1. What are the common symptoms of OBDII code P2121 in a Dodge vehicle?

- Common symptoms include issues with acceleration, reduced engine power, rough idling, and the vehicle going into "limp mode."

2. What can cause the Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance code P2121 in a Dodge?

- Possible causes include a faulty throttle position sensor, damaged wiring or connections, a defective accelerator pedal position sensor, or issues with the throttle body.

3. How serious is the P2121 OBDII code in a Dodge?

- Ignoring this code can lead to unsafe driving conditions and potential damage to other components in the vehicle. It is important to address the issue promptly.

4. Can I continue driving my Dodge with the P2121 code present?

- It is not recommended to continue driving the vehicle with this code present, as it can affect drivability and cause further damage to the engine or transmission.

5. How can I diagnose the P2121 code in my Dodge?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the throttle position sensor and related components, and testing the sensor's voltage and resistance.

6. Is it possible to repair the P2121 code in a Dodge myself?

- While some DIY enthusiasts may be able to address this issue, it is recommended to have a professional mechanic diagnose and repair the problem to ensure it is fixed correctly.

7. What are some tips for repairing the Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance code in a Dodge?

- Tips include checking and cleaning the throttle body, inspecting wiring for damage, ensuring proper sensor alignment, and performing a throttle relearn procedure if necessary.

8. How much does it typically cost to repair the P2121 code in a Dodge?

- The cost of repairs can vary depending on the specific issue causing the code, the labor rates in your area, and whether any parts need to be replaced. It is advisable to get a few quotes from different mechanics.

9. Can a faulty throttle position sensor cause other OBDII codes to appear in a Dodge?

- Yes, a malfunctioning throttle position sensor can cause other related codes to appear, such as P2120, P2122, or P2123, indicating different potential issues with the sensor circuit.

10. How can I prevent the P2121 code from reoccurring in my Dodge?

- Regular maintenance, such as cleaning the throttle body, checking for worn wiring, and ensuring proper sensor function during tune-ups, can help prevent the code from reoccurring.

Discuss the causes and fixes for P2121 Dodge OBDII Code

  • where is the location of throttle pedal position sensor/switch D range/Performance

  • What model and year is your vehicle? Usually is part of the throttle body.

  • The first codes I got were P2121 & P2123 I never had this problem before coming to Maine my Ram 3500. Is a southern truck. Having the same symptoms for a week I began plugging the truck up and it has operated perfectly since. However yesterday I kept getting a check gauges on the dash. They all were good except the battery gauge which is showing a discharge at the idle. When driving it’s charging but more so than usual. Today I put the code checker on thinking it would give a code for the alternator or electric system. All I got was the P2121

  • What year is your RAM?
    Depending on the year of your truck, there are no that many codes for low battery charge, instead you get codes of components that will no perform well with low battery charge. For example, P2121.
    My suggestion is to fix the low battery charge first. If the alternator is charging, then the battery is the most likely problem.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play