P2119 2008 Nissan Maxima Code - Electric Throttle Control Actuator
Quick Answer
Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator, Throttle plate sticking due to carbon build-up, Electric Throttle Control Actuator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2119 2008 Nissan Maxima indicates Electric Throttle Control Actuator.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator, Throttle plate sticking due to carbon build-up, Electric Throttle Control Actuator harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2119 2008 Nissan Maxima Description
The throttle position sensor detects the throttle valve position, and feeds the voltage signal to the ECM. The ECM judges the current opening angle of the throttle valve and controls the throttle valve opening angle in response to driving conditions via the throttle control motor.
What are the Possible Causes of the DTC P2119 2008 Nissan Maxima?
- Faulty Electric Throttle Control Actuator
- Throttle plate sticking due to carbon build-up
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator poor electrical circuit connection
How to Fix the DTC P2119 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2119 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2119 2008 Nissan Maxima code?
Need more information on how to fix the P2119 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2119 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2119 2008 Nissan Maxima Code
1. What does the OBDII code P2119 for a 2008 Nissan Maxima mean?
The code P2119 indicates an issue with the Electric Throttle Control Actuator in the vehicle.
2. What are some common symptoms of the P2119 code in a 2008 Nissan Maxima?
Common symptoms include the engine stalling, lack of acceleration, rough idling, and the vehicle going into "limp mode" with reduced power.
3. What are the possible causes of the P2119 code in a 2008 Nissan Maxima?
Potential causes include a faulty electric throttle control actuator, problems with the throttle position sensor, issues with the wiring or connectors, or a malfunctioning electronic control module.
4. How can I diagnose the P2119 code in my 2008 Nissan Maxima?
Diagnosis typically involves using an OBDII scanner to retrieve the trouble code, inspecting the throttle actuator and related components for damage or wear, and testing the electrical connections for proper voltage and continuity.
5. Is it safe to drive my 2008 Nissan Maxima with the P2119 code present?
It is not recommended to drive the vehicle with the P2119 code active, as it can lead to potential safety hazards and further damage to the engine components.
6. Can I repair the P2119 code in my 2008 Nissan Maxima myself?
While some DIY enthusiasts may attempt to address the issue, it is recommended to seek professional help to properly diagnose and repair the electric throttle control actuator.
7. How much does it typically cost to repair the P2119 code in a 2008 Nissan Maxima?
The cost of repair can vary depending on the extent of the issue and the specific parts that need to be replaced. It is advisable to obtain quotes from different mechanics or dealerships.
8. Are there any preventive maintenance tips to avoid the P2119 code in a 2008 Nissan Maxima?
Regularly servicing the throttle system, keeping the engine clean, and addressing any warning signs promptly can help prevent issues leading to the P2119 code.
9. Can the P2119 code in a 2008 Nissan Maxima cause long-term damage if left untreated?
Yes, ignoring the P2119 code can result in further damage to the engine components and potentially lead to more costly repairs down the line.
10. How long does it typically take to repair the P2119 code in a 2008 Nissan Maxima?
The repair time can vary depending on the exact issue causing the code and the availability of parts. It is best to consult with a professional mechanic for an accurate estimate of the repair duration.
Discuss the causes and fixes for P2119 2008 Nissan Maxima OBDII Code
Code P2119 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
