P2116 Code - Throttle/Pedal Position Sensor 'E' Minimum Stop Performance
Quick Answer
P2116 indicates Throttle/Pedal Position Sensor 'E' Minimum Stop Performance. Common causes include Faulty Throttle/Pedal Position Sensor, Throttle/Pedal Position Sensor harness is open or shorted, Throttle/Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2116 indicates Throttle/Pedal Position Sensor 'E' Minimum Stop Performance.
- Common causes
- Common causes include Faulty Throttle/Pedal Position Sensor, Throttle/Pedal Position Sensor harness is open or shorted, Throttle/Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2116 Description
What are the Possible Causes of the DTC P2116?
- Faulty Throttle/Pedal Position Sensor
- Throttle/Pedal Position Sensor harness is open or shorted
- Throttle/Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P2116?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2116 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2116 code?
Need more information on how to fix the P2116 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2116 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2116 Dodge — Throttle/Pedal Position Sensor 'E' Minimum Stop Performance
Frequently Asked Questions about P2116 Code
1. What are common symptoms of OBDII code P2116?
- Common symptoms include poor acceleration, rough idling, stalling, and the vehicle going into "limp mode."
2. What causes the OBDII code P2116 to trigger?
- The code is typically triggered by a faulty throttle or pedal position sensor, wiring issues, or a malfunctioning electronic throttle control system.
3. How can I diagnose the cause of OBDII code P2116?
- Diagnose the code by checking the throttle position sensor and pedal position sensor for proper operation, inspecting the wiring for any damage, and scanning the electronic throttle control system for faults.
4. Can I still drive my vehicle with OBDII code P2116?
- It is not recommended to drive the vehicle with this code as it can lead to unsafe driving conditions and potential damage to the engine.
5. How can I repair OBDII code P2116?
- Repair options include replacing the faulty throttle or pedal position sensor, repairing damaged wiring, or recalibrating the electronic throttle control system.
6. Is it possible to reset OBDII code P2116 without repairs?
- While clearing the code may temporarily turn off the check engine light, it is important to address the underlying issue to prevent further problems.
7. Can a DIY enthusiast fix OBDII code P2116?
- Depending on the skill level, DIY enthusiasts may be able to replace the sensors or repair wiring related to the code. However, more complex issues may require professional assistance.
8. How much does it cost to repair OBDII code P2116?
- Repair costs can vary depending on the extent of the issue, but typically range from $100 to $300 for parts and labor.
9. How long does it take to repair OBDII code P2116?
- Repair time can vary based on the specific cause of the code, but it generally takes a few hours for diagnosis and repair.
10. Can a failing throttle position sensor cause OBDII code P2116?
- Yes, a failing throttle position sensor can cause OBDII code P2116 as it may not be sending accurate signals to the engine control module.
Discuss the causes and fixes for P2116 OBDII Code
Code P2116 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
