AutoCodes – Hyundai – P2113 Hyundai

P2113 Hyundai Code - Throttle/Pedal Position Sensor 'B' Minimum Stop Performance

Quick Answer

Throttle flap actuator helps EEGR actuator in EGR control as controlling throttle flap position with the method of duty control. Common causes include Faulty Throttle Control Actuator, Throttle Control Actuator harness is open or shorted, Throttle Control Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2113 Hyundai indicates Throttle/Pedal Position Sensor 'B' Minimum Stop Performance.
Common causes: Common causes include Faulty Throttle Control Actuator, Throttle Control Actuator harness is open or shorted, Throttle Control Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,746

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2113 Hyundai Description

Throttle flap actuator helps EEGR actuator in EGR control as controlling throttle flap position with the method of duty control. In EURO 3 diesel engine, precise EGR control is more difficult than in EURO 4 engine. Even though EGR actuator opens exhaust gas outlet fully, it is difficult for exhaust gas to be inhaled at intake manifold because intake air is already exist to be inhaled at there in EURO 3 engine. However in EURO 4 engine, controlling throttle flap position, it is possible to regulate the differential pressure between exhaust and intake air. With the control of the differential pressure, the amount of exhaust air to be recirculated is regulated. Besides, When turning engines OFF, Throttle flap actuator cuts intake air to prevent dieselling.(In spite of turning engine OFF, engine does not stop and runs for a while due to rotating inertia of engine and fuel leakage at injector nozzle. )

OBDII Code P2113 Hyundai - Throttle/Pedal Position Sensor 'B' Minimum Stop Performance - AutoCodes.com — P2113 Hyundai Code - Throttle/Pedal Position Sensor 'B' Minimum Stop Performance

What does this mean?

What are the Possible Causes of the DTC P2113 Hyundai?

Faulty Throttle Control Actuator
Throttle Control Actuator harness is open or shorted
Throttle Control Actuator circuit poor electrical connection

How to Fix the DTC P2113 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2113 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2113 Hyundai code?

Need more information on how to fix the P2113 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2113 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2113 Hyundai Code

1. What are the common symptoms of OBDII code P2113 in a Hyundai related to the Throttle/Pedal Position Sensor 'B' Minimum Stop Performance?

The common symptoms include poor acceleration, reduced engine power, stalling, and the vehicle going into limp mode.

2. What are the possible causes of OBDII code P2113 in a Hyundai?

The code P2113 in a Hyundai is typically triggered by a faulty throttle position sensor, wiring issues, or a malfunctioning electronic throttle control system.

3. How can I diagnose the cause of OBDII code P2113 in my Hyundai?

To diagnose the issue, you can use a diagnostic scanner to read the trouble codes, perform a visual inspection of the throttle position sensor and its wiring, and conduct testing to verify the sensor's functionality.

4. Can I continue driving my Hyundai with OBDII code P2113 present?

It is not recommended to drive your Hyundai with code P2113 active as it can lead to further damage to the engine and other components. It is best to address the issue promptly.

5. Is it possible to repair OBDII code P2113 in a Hyundai by replacing the throttle position sensor?

Yes, in many cases, replacing the faulty throttle position sensor can resolve the P2113 code issue. However, it's important to ensure that the sensor is properly calibrated after replacement.

6. Are there any DIY tips for fixing OBDII code P2113 in a Hyundai?

If you have experience with automotive repairs, you may be able to replace the throttle position sensor yourself. Just make sure to follow the manufacturer's guidelines and use the correct tools.

7. How much does it typically cost to repair OBDII code P2113 in a Hyundai at a professional auto repair shop?

The cost of repairing OBDII code P2113 in a Hyundai can vary depending on the shop's labor rates, the cost of parts, and any additional repairs needed. It's best to get a few quotes from different shops.

8. Can a dirty throttle body cause OBDII code P2113 in a Hyundai?

A dirty throttle body can contribute to issues with the throttle position sensor and trigger code P2113 in a Hyundai. It's recommended to clean the throttle body as part of the troubleshooting process.

9. Will resetting the ECU clear OBDII code P2113 in a Hyundai?

Resetting the ECU may temporarily clear the code, but if the underlying issue with the throttle position sensor persists, the code is likely to return. It's important to diagnose and fix the root cause.

10. How can I prevent OBDII code P2113 from occurring in my Hyundai in the future?

Regular maintenance, such as cleaning the throttle body, checking the wiring harness for damage, and addressing any issues promptly, can help prevent OBDII code P2113 from occurring in your Hyundai.