AutoCodes – Jeep – P2111 Jeep

P2111 Jeep Code - Electronic Throttle Control Unable To Close

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve using gears. Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator, Throttle Actuator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2111 Jeep indicates Electronic Throttle Control Unable To Close.
Common causes: Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator, Throttle Actuator harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,117

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2111 Jeep Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position sensor, which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM to control the throttle actuator and set the throttle valve angle in response to driver inputs.

OBDII Code P2111 Jeep - Electronic Throttle Control Unable To Close - AutoCodes.com — P2111 Jeep Code - Electronic Throttle Control Unable To Close

What does this mean?

What are the Possible Causes of the DTC P2111 Jeep?

Throttle Body Plate Binding
Faulty Throttle Actuator
Throttle Actuator harness is open or shorted
Throttle Actuator circuit poor electrical connection

How to Fix the DTC P2111 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2111 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2111 Jeep code?

Need more information on how to fix the P2111 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2111 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2111 Jeep Code

1. What are the common symptoms of OBDII code P2111 in a Jeep related to Electronic Throttle Control Unable To Close?

The common symptoms include reduced engine power, stalling, rough idling, and the vehicle going into limp mode.

2. What are the possible causes of OBDII code P2111 in a Jeep?

The code P2111 in a Jeep usually indicates issues with the electronic throttle control system, such as a faulty throttle body, damaged wiring, or a malfunctioning throttle position sensor.

3. How serious is the OBDII code P2111 in a Jeep?

OBDII code P2111 should be taken seriously as it can lead to unsafe driving conditions due to the potential loss of engine power and control over the throttle.

4. Can I continue driving my Jeep with the OBDII code P2111 present?

It is not recommended to continue driving your Jeep with the code P2111 present, as it can result in further damage to the engine or other components.

5. How can I diagnose and repair OBDII code P2111 in my Jeep?

Diagnosing and repairing code P2111 may require checking the throttle body, throttle position sensor, and related wiring for faults. It is recommended to consult a qualified mechanic for a proper diagnosis and repair.

6. Is it possible to reset the OBDII code P2111 in a Jeep without fixing the underlying issue?

Resetting the code without fixing the underlying issue will only temporarily clear the error code. The problem will likely resurface until the root cause is addressed.

7. Can a dirty throttle body cause the OBDII code P2111 in a Jeep?

Yes, a dirty throttle body can disrupt the proper functioning of the electronic throttle control system, potentially triggering code P2111 in a Jeep.

8. Are there any preventive maintenance steps to avoid OBDII code P2111 in a Jeep?

Regularly cleaning the throttle body, checking the throttle position sensor, and ensuring proper wiring connections can help prevent issues leading to code P2111 in a Jeep.

9. How much does it cost to repair OBDII code P2111 in a Jeep?

The cost of repairing OBDII code P2111 in a Jeep can vary depending on the specific cause of the issue. It is advisable to obtain a diagnosis from a mechanic to determine the exact cost.

10. Can a DIY enthusiast fix OBDII code P2111 in a Jeep?

While some basic troubleshooting steps can be taken by a DIY enthusiast, diagnosing and repairing code P2111 often requires specialized tools and knowledge. It is recommended to seek professional help for a proper fix.