AutoCodes – Toyota – P2111 2008 Toyota Prius

P2111 2008 Toyota Prius Code - Throttle Actuator Control System - Stuck Open

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve using gears. Common causes include Dirty Throttle Body, Throttle Body Plate Binding, Faulty Throttle Actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2111 2008 Toyota Prius indicates Throttle Actuator Control System - Stuck Open.
Common causes: Common causes include Dirty Throttle Body, Throttle Body Plate Binding, Faulty Throttle Actuator.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,896

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2111 2008 Toyota Prius Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position sensor, which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM to control the throttle actuator and set the throttle valve angle in response to driver inputs.

OBDII Code P2111 2008 Toyota Prius - Throttle Actuator Control System - Stuck Open - AutoCodes.com — P2111 2008 Toyota Prius Code - Throttle Actuator Control System - Stuck Open

What does this mean?

What are the Possible Causes of the DTC P2111 2008 Toyota Prius?

Dirty Throttle Body
Throttle Body Plate Binding
Faulty Throttle Actuator
Throttle Actuator harness is open or shorted
Throttle Actuator circuit poor electrical connection

How to Fix the DTC P2111 2008 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2111 2008 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2111 2008 Toyota Prius code?

Need more information on how to fix the P2111 2008 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2111 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2111 2008 Toyota Prius Code

1. What does OBDII code P2111 mean on a 2008 Toyota Prius?

The code P2111 indicates a problem with the Throttle Actuator Control System being stuck open in a 2008 Toyota Prius.

2. What are the common symptoms of OBDII code P2111 in a 2008 Toyota Prius?

Common symptoms of code P2111 in a 2008 Toyota Prius include reduced engine power, poor acceleration, and the vehicle going into limp mode.

3. What are the possible causes of OBDII code P2111 in a 2008 Toyota Prius?

Potential causes of code P2111 in a 2008 Toyota Prius include a faulty throttle body, throttle position sensor issues, wiring problems, or a defective electronic throttle control system.

4. How can I diagnose OBDII code P2111 in my 2008 Toyota Prius?

Diagnosing code P2111 in a 2008 Toyota Prius involves checking the throttle body, inspecting the throttle position sensor, testing the wiring connections, and scanning the vehicle's computer for related error codes.

5. Can I still drive my 2008 Toyota Prius with OBDII code P2111?

It is not recommended to drive your 2008 Toyota Prius with code P2111 as it can lead to performance issues and potential safety concerns. It's best to address the problem promptly.

6. How can I repair OBDII code P2111 in my 2008 Toyota Prius?

Repairing code P2111 in a 2008 Toyota Prius may involve cleaning or replacing the throttle body, fixing any wiring issues, calibrating the throttle position sensor, or replacing the electronic throttle control system components as needed.

7. Can a DIY enthusiast fix OBDII code P2111 in a 2008 Toyota Prius?

While some aspects of addressing code P2111 may be DIY-friendly, it's recommended to have a professional mechanic diagnose and repair this issue due to the complexity of electronic throttle control systems.

8. How much does it cost to fix OBDII code P2111 in a 2008 Toyota Prius?

The cost of repairing code P2111 in a 2008 Toyota Prius can vary depending on the root cause of the issue, the parts needed, and the labor rates of the repair shop. It's advisable to get multiple quotes for an accurate estimate.

9. Will resetting the OBDII code P2111 in my 2008 Toyota Prius make the problem go away?

Simply resetting the code P2111 in a 2008 Toyota Prius without addressing the underlying issue will likely not solve the problem. It's crucial to diagnose and repair the root cause to prevent the code from reappearing.

10. Is OBDII code P2111 a common issue in 2008 Toyota Prius vehicles?

While not extremely common, OBDII code P2111 can occur in 2008 Toyota Prius models due to various factors affecting the throttle actuator control system. Regular maintenance and prompt repairs can help prevent this issue.