P2110 Buick Code - Throttle Actuator Control System - Forced Limited Engine Speed
Quick Answer
The Throttle Actuator Control (TAC) system uses vehicle electronics and components to calculate and control the position of the throttle blade. Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2110 Buick indicates Throttle Actuator Control System - Forced Limited Engine Speed.
- Common causes
- Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2110 Buick Description
The TAC system components include, but are not limited to the following:
- The accelerator pedal position (APP) sensors
- The throttle body
- The Powertrain Control Module (PCM)
Each of these components interface together to ensure accurate calculations and control of the throttle position (TP).
Throttle Body Assembly
The throttle body for the throttle actuator control (TAC) system is similar to a conventional throttle body with several exceptions. One exception being the use of a motor to control the throttle position instead of a mechanical cable. Another exception is the throttle position (TP) sensor. The TP sensor is mounted in the throttle body assembly. The TP sensor is 2 individual TP sensors within the throttle body assembly. Two separate signal, low reference, and 5-volt reference circuits are used to connect the TP sensors and the Powertrain Control Module (PCM). TP sensor 2 signal voltage increases as the throttle opens. TP sensor 1 signal voltage decreases as the throttle opens.
What are the Possible Causes of the DTC P2110 Buick?
- Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection
How to Fix the DTC P2110 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2110 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2110 Buick code?
Need more information on how to fix the P2110 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2110 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2110 Buick Code
What does the OBDII code P2110 mean for a Buick?
P2110 indicates that the Throttle Actuator Control System has entered a "Forced Limited Engine Speed" mode to prevent damage due to a malfunction.
What are the common symptoms of code P2110 in a Buick?
Symptoms include reduced engine power, limited acceleration, the Check Engine Light illuminating, and potentially difficulty maintaining higher speeds.
What causes the P2110 code to appear on a Buick?
Common causes include a malfunctioning throttle body, faulty throttle actuator motor, wiring issues, or problems with the powertrain control module (PCM).
Can a dirty throttle body trigger code P2110?
Yes, carbon buildup or debris in the throttle body can interfere with throttle operation and trigger this code.
How is code P2110 diagnosed in a Buick?
A technician will use a scan tool to check for related codes, visually inspect the throttle body, and test the throttle actuator motor and wiring connections.
Can driving with code P2110 damage the engine?
Driving with this code may not directly damage the engine, but limited power can create unsafe driving conditions. Repairs should be prioritized.
How do you fix code P2110 on a Buick?
Repairs may involve cleaning or replacing the throttle body, repairing wiring or connectors, or reprogramming/replacing the PCM if necessary.
Is code P2110 related to other throttle control codes?
Yes, P2110 may appear alongside other throttle control codes like P2101 or P2107, which can help diagnose the specific issue.
Can a failing PCM cause code P2110 in a Buick?
Yes, a failing PCM may incorrectly limit engine speed or misinterpret throttle signals, resulting in this code.
Does code P2110 require immediate attention?
Yes, although it may not cause immediate engine damage, limited engine power can impact drivability and safety, so prompt diagnosis and repair are recommended.
Discuss the causes and fixes for P2110 Buick OBDII Code
Code P2110 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
