AutoCodes – Ford – P2110 2011 Ford Fusion

P2110 2011 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2110 2011 Ford Fusion indicates Throttle Actuator Control System - Forced Limited RPM.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,023

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2110 2011 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2110 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced limited RPM.

OBDII Code P2110 2011 Ford Fusion - Throttle Actuator Control System - Forced Limited RPM - AutoCodes.com — P2110 2011 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

What does this mean?

What are the Possible Causes of the DTC P2110 2011 Ford Fusion?

Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2110 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2110 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2110 2011 Ford Fusion code?

Need more information on how to fix the P2110 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2110 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2110 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P2110 in a 2011 Ford Fusion?

The common symptoms of P2110 include the vehicle going into "limp mode," where it is restricted to a low RPM range, reduced power output, and potential difficulty accelerating.

2. What does the OBDII code P2110 Throttle Actuator Control System - Forced Limited RPM indicate in a 2011 Ford Fusion?

P2110 indicates an issue with the throttle actuator control system, which is causing the engine to be limited to a specific RPM range to prevent further damage.

3. What are the possible causes of OBDII code P2110 in a 2011 Ford Fusion?

Possible causes of P2110 include a faulty throttle body, damaged throttle actuator control motor, wiring issues, or a malfunctioning powertrain control module (PCM).

4. How can I diagnose the OBDII code P2110 in my 2011 Ford Fusion?

Diagnosing P2110 typically involves checking the throttle body and its components for any physical damage, testing the throttle actuator control motor, inspecting the wiring for any faults, and scanning the PCM for related error codes.

5. Can I continue driving my 2011 Ford Fusion with the OBDII code P2110 present?

It is not recommended to drive your vehicle with the P2110 code present as it can lead to reduced performance and potential safety issues. It is best to address the underlying problem promptly.

6. Is it safe to reset the OBDII code P2110 in a 2011 Ford Fusion using a diagnostic scanner?

While resetting the code may temporarily remove the warning light, it will not fix the underlying issue causing P2110. It is advisable to diagnose and repair the problem to prevent further complications.

7. How much does it typically cost to repair OBDII code P2110 in a 2011 Ford Fusion?

The cost of repairing P2110 can vary depending on the root cause of the issue. It may involve replacing the throttle body, throttle actuator control motor, or repairing wiring, with costs ranging from a few hundred to over a thousand dollars.

8. Can a DIY enthusiast fix the OBDII code P2110 in a 2011 Ford Fusion?

While some basic troubleshooting like checking connections and wiring can be done by a DIY enthusiast, fixing P2110 may require specialized tools and expertise. It is recommended to consult a professional mechanic for complex repairs.

9. Will driving with the OBDII code P2110 in a 2011 Ford Fusion damage the engine?

Continued driving with P2110 can potentially lead to further damage to the engine or other components due to the restricted RPM range and reduced power output. It is best to address the issue promptly.

10. How long does it typically take to repair OBDII code P2110 in a 2011 Ford Fusion?

The repair time for P2110 can vary based on the exact cause of the issue and the availability of parts. Simple fixes like replacing a sensor may take a few hours, while more complex repairs could require a day or more.