AutoCodes – Ford – P2110 2009 Ford Fusion

P2110 2009 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2110 2009 Ford Fusion indicates Throttle Actuator Control System - Forced Limited RPM.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,674

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2110 2009 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2110 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced limited RPM.

OBDII Code P2110 2009 Ford Fusion - Throttle Actuator Control System - Forced Limited RPM - AutoCodes.com — P2110 2009 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

What does this mean?

What are the Possible Causes of the DTC P2110 2009 Ford Fusion?

Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2110 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2110 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2110 2009 Ford Fusion code?

Need more information on how to fix the P2110 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2110 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2110 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P2110 in a 2009 Ford Fusion?

- Common symptoms include reduced engine power, limited vehicle speed, and the vehicle going into "limp mode."

2. What can cause the OBDII code P2110 in a 2009 Ford Fusion?

- The code P2110 is typically caused by a malfunction in the throttle actuator control system, such as a faulty throttle body or a wiring issue.

3. How can I diagnose the throttle actuator control system on a 2009 Ford Fusion with code P2110?

- Diagnosing the throttle actuator control system involves checking the throttle body for proper operation, inspecting wiring connections, and using a scan tool to monitor sensor data.

4. Can a dirty throttle body cause the OBDII code P2110 in a 2009 Ford Fusion?

- Yes, a dirty or clogged throttle body can disrupt the operation of the throttle actuator control system and trigger code P2110.

5. What are some repair tips for fixing OBDII code P2110 in a 2009 Ford Fusion?

- Repair tips may include cleaning the throttle body, checking and repairing any damaged wiring, and replacing the throttle body if necessary.

6. Is it safe to continue driving with the OBDII code P2110 in a 2009 Ford Fusion?

- It is not recommended to drive with code P2110 as it can lead to further damage to the vehicle and potentially unsafe driving conditions.

7. Can resetting the OBDII code P2110 in a 2009 Ford Fusion make it go away permanently?

- Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear.

8. How much does it typically cost to repair OBDII code P2110 in a 2009 Ford Fusion?

- The cost of repairing code P2110 can vary depending on the exact cause of the issue, but it may involve expenses for parts and labor.

9. Are there any recalls or technical service bulletins related to OBDII code P2110 in a 2009 Ford Fusion?

- It is advisable to check with Ford or authorized service centers for any recalls or technical service bulletins related to code P2110 in the 2009 Fusion.

10. Can a DIY enthusiast fix OBDII code P2110 in a 2009 Ford Fusion, or is it best left to professionals?

- While some simple troubleshooting steps can be done by DIY enthusiasts, diagnosing and repairing code P2110 may require specialized tools and expertise, making it best left to professionals.