AutoCodes – Ford – P2107 2011 Ford Fusion

P2107 2011 Ford Fusion Code - Throttle Actuator Control Module Processor

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2107 2011 Ford Fusion indicates Throttle Actuator Control Module Processor.
Common causes: Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,554

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2107 2011 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2107 code is set when the Electronic Throttle Control (ETC) control area of the Powertrain Control Module (PCM) failed test. Fault code could the result of incorrect Throttle Position (TP) command of the Throttle Actuator Control Module (TACM).

OBDII Code P2107 2011 Ford Fusion - Throttle Actuator Control Module Processor - AutoCodes.com — P2107 2011 Ford Fusion Code - Throttle Actuator Control Module Processor

What does this mean?

What are the Possible Causes of the DTC P2107 2011 Ford Fusion?

Faulty Electronic Throttle Body (ETB)
Electronic Throttle Body (ETB) harness is open or shorted
Electronic Throttle Body (ETB) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2107 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2107 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2107 2011 Ford Fusion code?

Need more information on how to fix the P2107 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2107 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2107 2011 Ford Fusion Code

1. What does OBDII code P2107 on a 2011 Ford Fusion indicate?

The OBDII code P2107 on a 2011 Ford Fusion indicates a problem with the Throttle Actuator Control Module Processor.

2. What are common symptoms of OBDII code P2107 on a 2011 Ford Fusion?

Common symptoms of OBDII code P2107 on a 2011 Ford Fusion include reduced engine power, rough idling, and potentially stalling.

3. What are possible causes of OBDII code P2107 on a 2011 Ford Fusion?

Possible causes of OBDII code P2107 on a 2011 Ford Fusion include a faulty throttle actuator control module, wiring issues, or a problem with the throttle position sensor.

4. How can I diagnose OBDII code P2107 on a 2011 Ford Fusion?

Diagnosing OBDII code P2107 on a 2011 Ford Fusion typically involves using a scan tool to check for the code, inspecting the throttle actuator control module and related components, and testing for proper voltage and signals.

5. Can OBDII code P2107 on a 2011 Ford Fusion be fixed at home?

Depending on the exact cause, some DIY enthusiasts may be able to fix OBDII code P2107 on a 2011 Ford Fusion by replacing the throttle actuator control module or addressing wiring issues. However, professional diagnosis and repair may be necessary for more complex issues.

6. Is it safe to drive with OBDII code P2107 on a 2011 Ford Fusion?

It is not recommended to drive with OBDII code P2107 on a 2011 Ford Fusion, as it can lead to performance issues and potentially unsafe driving conditions. It's best to address the problem as soon as possible.

7. How much does it typically cost to repair OBDII code P2107 on a 2011 Ford Fusion?

The cost to repair OBDII code P2107 on a 2011 Ford Fusion can vary depending on the exact cause of the issue and whether you choose to do the repair yourself or take it to a professional mechanic. Costs can range from a few hundred to over a thousand dollars.

8. Can a dirty throttle body cause OBDII code P2107 on a 2011 Ford Fusion?

While a dirty throttle body can contribute to issues with the throttle system, OBDII code P2107 on a 2011 Ford Fusion is more likely related to a specific problem with the throttle actuator control module or related components.

9. Will resetting the OBDII codes clear P2107 on a 2011 Ford Fusion?

Resetting the OBDII codes may temporarily clear the P2107 code on a 2011 Ford Fusion, but if the underlying issue is not addressed, the code is likely to reappear. It's important to diagnose and fix the root cause of the problem.

10. How can I prevent OBDII code P2107 on a 2011 Ford Fusion from recurring?

To prevent OBDII code P2107 on a 2011 Ford Fusion from recurring, it's important to address any underlying issues promptly, perform regular maintenance on the throttle system, and ensure all related components are in good working condition.