AutoCodes – Ford – P2107 2009 Ford Fusion

P2107 2009 Ford Fusion Code - Throttle Actuator Control Module Processor

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2107 2009 Ford Fusion indicates Throttle Actuator Control Module Processor.
Common causes: Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,595

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2107 2009 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2107 code is set when the Electronic Throttle Control (ETC) control area of the Powertrain Control Module (PCM) failed test. Fault code could the result of incorrect Throttle Position (TP) command of the Throttle Actuator Control Module (TACM).

OBDII Code P2107 2009 Ford Fusion - Throttle Actuator Control Module Processor - AutoCodes.com — P2107 2009 Ford Fusion Code - Throttle Actuator Control Module Processor

What does this mean?

What are the Possible Causes of the DTC P2107 2009 Ford Fusion?

Faulty Electronic Throttle Body (ETB)
Electronic Throttle Body (ETB) harness is open or shorted
Electronic Throttle Body (ETB) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2107 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2107 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2107 2009 Ford Fusion code?

Need more information on how to fix the P2107 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2107 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2107 2009 Ford Fusion Code

1. What does OBDII code P2107 for a 2009 Ford Fusion indicate?

The OBDII code P2107 on a 2009 Ford Fusion specifically points to an issue with the Throttle Actuator Control Module Processor.

2. What are common symptoms of OBDII code P2107 on a 2009 Ford Fusion?

Common symptoms of OBDII code P2107 in a 2009 Ford Fusion may include reduced engine power, acceleration hesitation, and the vehicle going into "limp mode."

3. What are the possible causes of OBDII code P2107 on a 2009 Ford Fusion?

Potential causes of OBDII code P2107 on a 2009 Ford Fusion include a faulty throttle body, damaged wiring or connectors, or issues with the throttle actuator control module itself.

4. How can I diagnose the OBDII code P2107 on my 2009 Ford Fusion?

To diagnose OBDII code P2107 on a 2009 Ford Fusion, it is recommended to use a diagnostic scanner to read the code, inspect the throttle body and related components for any visible damage, and test the throttle actuator control module.

5. Can I drive my 2009 Ford Fusion with OBDII code P2107?

It is not recommended to drive your 2009 Ford Fusion with OBDII code P2107, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.

6. How can I repair OBDII code P2107 on my 2009 Ford Fusion?

Repairing OBDII code P2107 on a 2009 Ford Fusion may involve replacing the throttle body, repairing or replacing damaged wiring or connectors, or replacing the throttle actuator control module.

7. Is it possible to reset OBDII code P2107 on a 2009 Ford Fusion?

While you may be able to temporarily clear OBDII code P2107 on a 2009 Ford Fusion by resetting the vehicle's computer, it is crucial to address the root cause of the issue to prevent the code from reoccurring.

8. How much does it typically cost to fix OBDII code P2107 on a 2009 Ford Fusion?

The cost to fix OBDII code P2107 on a 2009 Ford Fusion can vary depending on the specific repairs needed, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. Can OBDII code P2107 on a 2009 Ford Fusion cause other problems if left unaddressed?

If left unaddressed, OBDII code P2107 on a 2009 Ford Fusion can potentially lead to further damage to the throttle system, decreased fuel efficiency, and continued performance issues.

10. Are there any preventative measures to avoid OBDII code P2107 on a 2009 Ford Fusion?

To help prevent OBDII code P2107 on a 2009 Ford Fusion, it is advisable to perform regular maintenance on the throttle system, address any warning signs promptly, and avoid harsh driving habits that can strain the throttle components.