P2106 GMC Code - Throttle Control System Performance - Throttle Limitations Active
Quick Answer
The Throttle Actuator Control (TAC) system uses vehicle electronics and components to calculate and control the position of the throttle blade. Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2106 GMC indicates Throttle Control System Performance - Throttle Limitations Active.
- Common causes
- Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2106 GMC Description
The TAC system components include, but are not limited to the following:
- The accelerator pedal position (APP) sensors
- The throttle body
- The Powertrain Control Module (PCM)
Each of these components interface together to ensure accurate calculations and control of the throttle position (TP).
Throttle Body Assembly
The throttle body for the throttle actuator control (TAC) system is similar to a conventional throttle body with several exceptions. One exception being the use of a motor to control the throttle position instead of a mechanical cable. Another exception is the throttle position (TP) sensor. The TP sensor is mounted in the throttle body assembly. The TP sensor is 2 individual TP sensors within the throttle body assembly. Two separate signal, low reference, and 5-volt reference circuits are used to connect the TP sensors and the Powertrain Control Module (PCM). TP sensor 2 signal voltage increases as the throttle opens. TP sensor 1 signal voltage decreases as the throttle opens.
What are the Possible Causes of the DTC P2106 GMC?
- Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection
How to Fix the DTC P2106 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2106 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2106 GMC code?
Need more information on how to fix the P2106 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2106 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2106 GMC Code
No Frequently Asked Questions about P2106 GMC Code found.
Discuss the causes and fixes for P2106 GMC OBDII Code
Code P2106 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
