P2106 Buick Code - Throttle Control System Performance - Throttle Limitations Active
Quick Answer
The Throttle Actuator Control (TAC) system uses vehicle electronics and components to calculate and control the position of the throttle blade. Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2106 Buick indicates Throttle Control System Performance - Throttle Limitations Active.
- Common causes
- Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2106 Buick Description
The TAC system components include, but are not limited to the following:
- The accelerator pedal position (APP) sensors
- The throttle body
- The Powertrain Control Module (PCM)
Each of these components interface together to ensure accurate calculations and control of the throttle position (TP).
Throttle Body Assembly
The throttle body for the throttle actuator control (TAC) system is similar to a conventional throttle body with several exceptions. One exception being the use of a motor to control the throttle position instead of a mechanical cable. Another exception is the throttle position (TP) sensor. The TP sensor is mounted in the throttle body assembly. The TP sensor is 2 individual TP sensors within the throttle body assembly. Two separate signal, low reference, and 5-volt reference circuits are used to connect the TP sensors and the Powertrain Control Module (PCM). TP sensor 2 signal voltage increases as the throttle opens. TP sensor 1 signal voltage decreases as the throttle opens.
What are the Possible Causes of the DTC P2106 Buick?
- Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection
How to Fix the DTC P2106 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2106 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2106 Buick code?
Need more information on how to fix the P2106 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2106 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2106 Buick Code
What does the OBDII code P2106 mean on a Buick?
P2106 indicates that the Engine Control Module (ECM) has detected a problem with the Throttle Control System and has activated a "throttle limitations" mode to protect the engine.
What are the common symptoms of code P2106 in a Buick?
Symptoms may include reduced engine power, limited acceleration, the Check Engine Light being illuminated, and possibly the vehicle entering "limp mode."
What causes the P2106 code to appear in a Buick?
Common causes include a malfunctioning throttle body, issues with the throttle position sensor, wiring or connector problems, or a failure in the powertrain control module (PCM).
Can a dirty throttle body cause the P2106 code?
Yes, a dirty or clogged throttle body can interfere with airflow and trigger the P2106 code.
How can I fix the P2106 code on my Buick?
Potential fixes include cleaning or replacing the throttle body, repairing damaged wiring or connectors, replacing the throttle position sensor, or updating/replacing the ECM.
Is it safe to drive with the P2106 code active?
Driving with P2106 active may result in reduced power and limited acceleration, which could be unsafe in certain situations. It’s best to address the issue promptly.
Will disconnecting the battery clear the P2106 code on a Buick?
Disconnecting the battery may temporarily clear the code, but if the underlying issue isn’t resolved, the code will likely return.
Does the P2106 code always mean the throttle body is bad?
No, the code can also be caused by sensor failures, wiring issues, or a problem with the ECM, so the throttle body isn’t always the culprit.
Can a failing accelerator pedal position sensor cause the P2106 code?
Yes, a malfunctioning accelerator pedal position sensor can send incorrect signals to the ECM, leading to the P2106 code.
How much does it typically cost to repair the P2106 code on a Buick?
Repair costs vary depending on the cause, ranging from $100 for a throttle body cleaning to $500 or more for replacing the throttle body or ECM.
Discuss the causes and fixes for P2106 Buick OBDII Code
Code P2106 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
