AutoCodes – Dodge – P2104 Dodge

P2104 Dodge Code - Throttle Actuator Control System - Forced Engine Idle

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2104 Dodge indicates Throttle Actuator Control System - Forced Engine Idle.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,104

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2104 Dodge Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2104 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced idle.

OBDII Code P2104 Dodge - Throttle Actuator Control System - Forced Engine Idle - AutoCodes.com — P2104 Dodge Code - Throttle Actuator Control System - Forced Engine Idle

What does this mean?

What are the Possible Causes of the DTC P2104 Dodge?

Faulty Throttle Actuator Control (TAC)
Throttle Actuator Control (TAC) harness is open or shorted
Throttle Actuator Control (TAC) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2104 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2104 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2104 Dodge code?

Need more information on how to fix the P2104 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2104 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.