AutoCodes – Nissan – P2103 2013 Nissan Rogue

P2103 2013 Nissan Rogue Code - Throttle Control Motor Relay Circuit Short

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2103 2013 Nissan Rogue indicates Throttle Control Motor Relay Circuit Short.
Common causes: Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,491

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2103 2013 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2103 2013 Nissan Rogue - Throttle Control Motor Relay Circuit Short - AutoCodes.com — P2103 2013 Nissan Rogue Code - Throttle Control Motor Relay Circuit Short

What does this mean?

What are the Possible Causes of the DTC P2103 2013 Nissan Rogue?

Dirty throttle body
Faulty Throttle Actuator Control Motor Relay
Throttle Actuator Control Motor Relay harness is open
Throttle Actuator Control Motor Relay circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2103 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check fuses on the IPDM first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2103 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2103 2013 Nissan Rogue code?

Need more information on how to fix the P2103 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2103 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2103 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2103 in a 2013 Nissan Rogue?

The common symptoms of code P2103 include the vehicle going into "limp mode," reduced engine power, rough idling, stalling, and the Check Engine light illuminating.

2. What does the OBDII code P2103 indicating a Throttle Control Motor Relay Circuit Short mean in a 2013 Nissan Rogue?

Code P2103 in a 2013 Nissan Rogue indicates a malfunction in the throttle control motor relay circuit, typically resulting in issues with the electronic throttle control system.

3. What are the possible causes of OBDII code P2103 in a 2013 Nissan Rogue?

Common causes of code P2103 in a 2013 Nissan Rogue include a faulty throttle control motor relay, damaged wiring or connectors in the circuit, or a malfunctioning throttle control motor.

4. How serious is OBDII code P2103 in a 2013 Nissan Rogue?

Code P2103 should be addressed promptly as it can lead to performance issues and safety concerns while driving. It is advisable to have the vehicle diagnosed and repaired as soon as possible.

5. Can I continue driving my 2013 Nissan Rogue with OBDII code P2103?

It is not recommended to drive your Nissan Rogue with code P2103, as it can cause unpredictable throttle response and potentially dangerous driving conditions. It is best to have the issue resolved before driving the vehicle again.

6. How can I diagnose and repair OBDII code P2103 in my 2013 Nissan Rogue?

Diagnosing code P2103 involves using a scan tool to check for the specific error code and then inspecting the throttle control motor relay circuit for any faults. Repair typically involves replacing the faulty components and clearing the code.

7. Is it possible to reset OBDII code P2103 in a 2013 Nissan Rogue without fixing the issue?

Resetting the code without addressing the underlying problem will only temporarily clear the Check Engine light. The issue causing code P2103 will persist, and the code is likely to reappear once the system detects the fault again.

8. How much does it cost to repair OBDII code P2103 in a 2013 Nissan Rogue?

The cost of repairing code P2103 can vary depending on the specific cause of the issue, the labor rates in your area, and whether you choose to repair it yourself or take it to a professional mechanic. It is best to get a diagnostic assessment for an accurate estimate.

9. Can a DIY enthusiast fix OBDII code P2103 in a 2013 Nissan Rogue?

If you have the necessary tools, knowledge, and experience working on automotive electrical systems, you may be able to diagnose and repair code P2103 yourself. However, if you are unsure, it is recommended to seek professional assistance.

10. How can I prevent OBDII code P2103 from occurring in my 2013 Nissan Rogue?

To prevent code P2103, it is essential to regularly maintain your vehicle, including checking the throttle control system components for any signs of wear or damage. Additionally, addressing any performance issues promptly can help prevent more significant problems in the future.