AutoCodesToyota – P2103 2008 Toyota Camry

P2103 2008 Toyota Camry Code - Throttle Actuator Control Motor Circuit High

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2103 2008 Toyota Camry indicates Throttle Actuator Control Motor Circuit High.
Common causes
Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,361
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 28, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2103 2008 Toyota Camry Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.
OBDII Code P2103 2008 Toyota Camry - Throttle Actuator Control Motor Circuit High - AutoCodes.com
P2103 2008 Toyota Camry Code - Throttle Actuator Control Motor Circuit High

What are the Possible Causes of the DTC P2103 2008 Toyota Camry?

  • Dirty throttle body
  • Faulty Throttle Actuator Control Motor
  • Throttle Actuator Control Motor harness is open
  • Throttle Actuator Control Motor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2103 2008 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2103 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2103 2008 Toyota Camry code?

Need more information on how to fix the P2103 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2103 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2103 2008 Toyota Camry Code

1. What does the OBDII code P2103 mean on a 2008 Toyota Camry?

P2103 indicates a problem with the throttle actuator control (TAC) motor circuit, specifically a high voltage signal, suggesting an electrical issue.

2. What are the common symptoms of the P2103 code on a 2008 Toyota Camry?

Symptoms may include reduced engine power, poor acceleration, a check engine light, and the vehicle entering "limp mode."

3. What causes the P2103 code to appear on a 2008 Toyota Camry?

Common causes include a faulty throttle actuator control motor, wiring issues such as shorts or open circuits, or a malfunctioning engine control module (ECM).

4. Can I continue driving my 2008 Toyota Camry with the P2103 code?

It’s not recommended to drive long distances with this code as the vehicle may experience reduced performance and safety risks due to limp mode.

5. How is the P2103 code diagnosed on a 2008 Toyota Camry?

A mechanic will use a scan tool to retrieve the code, inspect the throttle body, test the TAC motor, and check for wiring or connector issues.

6. How do I fix the P2103 code on my 2008 Toyota Camry?

Repairs may include replacing the throttle actuator control motor, repairing damaged wiring, or, in rare cases, replacing the ECM.

7. Does the P2103 code mean the throttle body needs replacement?

Not necessarily. The issue could be with the TAC motor circuit wiring or connectors, so a thorough diagnosis is essential.

8. Can a dirty throttle body cause the P2103 code?

A dirty throttle body is unlikely to cause P2103, but cleaning it as part of maintenance may help prevent other throttle-related issues.

9. How much does it cost to fix the P2103 code on a 2008 Toyota Camry?

Costs vary depending on the repair, but throttle body replacement can range from $300 to $600, while wiring repairs may cost less.

10. Can a blown fuse trigger the P2103 code on a 2008 Toyota Camry?

Yes, a blown fuse in the throttle actuator circuit could potentially cause this code and should be checked during diagnosis.

Discuss the causes and fixes for P2103 2008 Toyota Camry OBDII Code

Code P2103 2008 Toyota Camry comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play