AutoCodes – Toyota – P2103 2006 Toyota Prius

P2103 2006 Toyota Prius Code - Throttle Actuator Control Motor Circuit High

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2103 2006 Toyota Prius indicates Throttle Actuator Control Motor Circuit High.
Common causes: Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,220

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2103 2006 Toyota Prius Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2103 2006 Toyota Prius - Throttle Actuator Control Motor Circuit High - AutoCodes.com — P2103 2006 Toyota Prius Code - Throttle Actuator Control Motor Circuit High

What does this mean?

What are the Possible Causes of the DTC P2103 2006 Toyota Prius?

Dirty throttle body
Faulty Throttle Actuator Control Motor
Throttle Actuator Control Motor harness is open
Throttle Actuator Control Motor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2103 2006 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2103 2006 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2103 2006 Toyota Prius code?

Need more information on how to fix the P2103 2006 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2103 2006 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2103 2006 Toyota Prius Code

1. What are the common symptoms of OBDII code P2103 in a 2006 Toyota Prius?

- Common symptoms include the Check Engine Light illuminating, reduced engine power, and potential difficulty accelerating.

2. What does the OBDII code P2103 indicate in a 2006 Toyota Prius?

- OBDII code P2103 indicates a problem with the Throttle Actuator Control Motor Circuit being too high in a 2006 Toyota Prius.

3. What are some possible causes of OBDII code P2103 in a 2006 Toyota Prius?

- Possible causes include a faulty throttle actuator control motor, damaged wiring or connectors in the circuit, or a malfunctioning electronic control module (ECM).

4. How can I diagnose the issue causing OBDII code P2103 in my 2006 Toyota Prius?

- You can diagnose the issue by checking the throttle actuator control motor, inspecting the wiring and connectors for damage, and using a diagnostic tool to read live data from the ECM.

5. Can I drive my 2006 Toyota Prius with OBDII code P2103 present?

- It is not recommended to drive your vehicle with OBDII code P2103 present, as it can lead to further damage and potential safety hazards due to reduced engine power.

6. How can I repair OBDII code P2103 in my 2006 Toyota Prius?

- Repairing OBDII code P2103 may involve replacing the throttle actuator control motor, repairing any damaged wiring or connectors, or reprogramming the ECM.

7. Is it safe to clear the OBDII code P2103 in my 2006 Toyota Prius without fixing the underlying issue?

- It is not recommended to clear the code without fixing the underlying issue, as the problem may persist and cause further issues down the road.

8. Can a DIY enthusiast fix OBDII code P2103 in a 2006 Toyota Prius?

- While some simple checks and repairs can be done by a DIY enthusiast, diagnosing and repairing OBDII code P2103 may require professional tools and expertise.

9. How much does it typically cost to repair OBDII code P2103 in a 2006 Toyota Prius?

- The cost of repairing OBDII code P2103 can vary depending on the exact cause of the issue, but it may range from $200 to $600 or more, including parts and labor.

10. How can I prevent OBDII code P2103 from occurring in my 2006 Toyota Prius?

- To prevent OBDII code P2103, it's important to perform regular maintenance on your vehicle, including checking the throttle system and addressing any warning signs promptly.