P2102 Jeep Code - Electronic Throttle Control Motor Circuit Low
Quick Answer
The Electronic Throttle Control (ETC) Motor is controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Control (ETC) Motor, Electronic Throttle Control Motor harness is open or shorted, Electronic Throttle Control Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2102 Jeep indicates Electronic Throttle Control Motor Circuit Low.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC) Motor, Electronic Throttle Control Motor harness is open or shorted, Electronic Throttle Control Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2102 Jeep Description
What are the Possible Causes of the DTC P2102 Jeep?
- Faulty Electronic Throttle Control (ETC) Motor
- Electronic Throttle Control Motor harness is open or shorted
- Electronic Throttle Control Motor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2102 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2102 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2102 Jeep code?
Need more information on how to fix the P2102 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2102 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2102 Jeep Code
1. What does the OBDII code P2102 mean on a Jeep?
P2102 indicates a problem with the Electronic Throttle Control (ETC) motor circuit, specifically a low voltage or low circuit condition.
2. What are the common symptoms of code P2102 on a Jeep?
Symptoms may include reduced engine performance, a Check Engine Light, limp mode activation, poor throttle response, or stalling.
3. What causes the P2102 code to appear on a Jeep?
Common causes include a faulty throttle control motor, damaged wiring or connectors in the throttle control circuit, a malfunctioning throttle body, or an issue with the powertrain control module (PCM).
4. Can I drive my Jeep with the P2102 code?
Driving with this code is not recommended, as it can lead to reduced performance, unsafe driving conditions, and potential engine damage.
5. How do I diagnose the P2102 code on a Jeep?
Start by checking the throttle body wiring and connectors for damage or corrosion, test the throttle control motor for proper operation, and verify the voltage and ground signals in the ETC circuit.
6. What tools do I need to repair a P2102 code on a Jeep?
You’ll need a scan tool, a multimeter to check circuit continuity and voltage, and possibly basic hand tools for inspecting and replacing throttle body components or wiring.
7. How much does it cost to fix a P2102 code on a Jeep?
Costs can vary, but replacing a throttle body typically ranges from $300 to $800, while wiring repairs may cost less depending on the extent of the damage.
8. Can a dirty throttle body cause the P2102 code?
Yes, a dirty or clogged throttle body can interfere with the operation of the throttle control motor, potentially triggering this code.
9. Will clearing the code with a scan tool fix the P2102 issue?
Clearing the code will turn off the Check Engine Light temporarily, but the root cause must be resolved to prevent the code from returning.
10. How do I prevent the P2102 code from recurring on my Jeep?
Regularly inspect and clean the throttle body, check the wiring and connectors for damage, and ensure proper maintenance of the electronic throttle control system.
Discuss the causes and fixes for P2102 Jeep OBDII Code
Code P2102 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
