AutoCodes – Hummer – P2101 Hummer

P2101 Hummer Code - Throttle Actuator Position Performance

Quick Answer

The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. Common causes include Faulty Throttle Actuator Control (TAC) module, Throttle Actuator Control (TAC) module harness is open or shorted, Throttle Actuator Control (TAC) module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2101 Hummer indicates Throttle Actuator Position Performance .
Common causes: Common causes include Faulty Throttle Actuator Control (TAC) module, Throttle Actuator Control (TAC) module harness is open or shorted, Throttle Actuator Control (TAC) module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,846

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 21, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2101 Hummer Description

The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. The ECM determines the drivers intent and then calculates the appropriate throttle response. The ECM achieves throttle positioning by providing a pulse width modulated voltage to the TAC motor. The TAC system uses the following circuits for Motor control 1 and Motor control 2.
Two processors are also used to monitor the TAC system data. Both processors are located within the ECM. Both processors monitor each other's data to verify that the indicated throttle position is correct.

OBDII Code P2101 Hummer - Throttle Actuator Position Performance - AutoCodes.com — P2101 Hummer Code - Throttle Actuator Position Performance

What does this mean?

What are the Possible Causes of the DTC P2101 Hummer?

Faulty Throttle Actuator Control (TAC) module
Throttle Actuator Control (TAC) module harness is open or shorted
Throttle Actuator Control (TAC) module circuit poor electrical connection

How to Fix the DTC P2101 Hummer?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the P2101 code on following HUMMER vehicles:

2006-2012 Hummer H3
HUMMER H3 Factory Service Bulletin OBDII Code P2101

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2101 Hummer code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2101 Hummer code?

Need more information on how to fix the P2101 Hummer code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2101 Hummer code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2101 Hummer Code

1. What are the common symptoms of OBDII code P2101 in a Hummer related to Throttle Actuator Position Performance?

- Common symptoms include reduced engine power, stalling, rough idle, and difficulty accelerating.

2. What are the possible causes of OBDII code P2101 in a Hummer?

- The code P2101 can be triggered by issues with the throttle body, throttle position sensor, wiring harness, or electronic control module.

3. How can I diagnose the cause of OBDII code P2101 in my Hummer?

- A thorough diagnostic scan using an OBDII scanner can help pinpoint the exact cause of the code. Checking the throttle body, sensor connections, and wiring for any issues is also recommended.

4. Can I drive my Hummer with OBDII code P2101 triggered?

- It is not recommended to drive your vehicle with code P2101 as it can lead to performance issues and potential safety hazards. It's best to address the underlying problem promptly.

5. How can I repair OBDII code P2101 related to Throttle Actuator Position Performance in my Hummer?

- Repair options include cleaning the throttle body, replacing the throttle position sensor, checking and repairing any damaged wiring, or recalibrating the electronic control module.

6. How much does it typically cost to repair OBDII code P2101 in a Hummer?

- The cost of repair can vary depending on the specific cause of the code. On average, it may range from $200 to $500 for parts and labor.

7. Can I reset OBDII code P2101 in my Hummer using a simple reset tool?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the code. It's important to diagnose and repair the problem to prevent it from recurring.

8. Will OBDII code P2101 cause my Hummer to fail an emissions test?

- Yes, code P2101 can cause your vehicle to fail an emissions test due to the impact on engine performance and emissions control systems.

9. Is it common for OBDII code P2101 to reoccur in a Hummer after repair?

- If the underlying issue is not properly addressed during repair, there is a possibility that code P2101 may reoccur. Thorough diagnosis and quality repairs can help prevent this.

10. Can a DIY enthusiast fix OBDII code P2101 in a Hummer, or is it best left to professionals?

- While some simple repairs like cleaning the throttle body can be done by DIY enthusiasts, diagnosing and repairing complex issues related to code P2101 may be best left to automotive professionals to ensure proper resolution.