AutoCodes – Nissan – P2101 2013 Nissan Rogue

P2101 2013 Nissan Rogue Code - Electric Throttle Control Performance

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2101 2013 Nissan Rogue indicates Electric Throttle Control Performance.
Common causes: Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,076

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2101 2013 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2101 2013 Nissan Rogue - Electric Throttle Control Performance - AutoCodes.com — P2101 2013 Nissan Rogue Code - Electric Throttle Control Performance

What does this mean?

What are the Possible Causes of the DTC P2101 2013 Nissan Rogue?

Faulty Electric Throttle Control (ETC) Actuator
Electric Throttle Control (ETC) Actuator harness is open or shorted
Electric Throttle Control (ETC) Actuator circuit poor electrical connection

How to Fix the DTC P2101 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2101 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2101 2013 Nissan Rogue code?

Need more information on how to fix the P2101 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2101 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2101 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2101 on a 2013 Nissan Rogue?

The common symptoms of OBDII code P2101 in a 2013 Nissan Rogue include a check engine light, reduced engine power, and difficulty accelerating.

2. What does OBDII code P2101 in a 2013 Nissan Rogue indicate?

OBDII code P2101 in a 2013 Nissan Rogue indicates an issue with the Electric Throttle Control System's performance.

3. What are the possible causes of OBDII code P2101 in a 2013 Nissan Rogue?

Possible causes of OBDII code P2101 in a 2013 Nissan Rogue include a faulty throttle body, a malfunctioning throttle position sensor, or problems with the wiring or connectors.

4. How can I diagnose the cause of OBDII code P2101 in my 2013 Nissan Rogue?

To diagnose the cause of OBDII code P2101 in a 2013 Nissan Rogue, you can use a scan tool to check for any related codes, visually inspect the throttle body and its connections, and test the throttle position sensor.

5. Can I still drive my 2013 Nissan Rogue with OBDII code P2101?

It is not recommended to drive your 2013 Nissan Rogue with OBDII code P2101, as it can lead to further damage and safety issues. Have the issue diagnosed and repaired before driving the vehicle.

6. How can I repair OBDII code P2101 in my 2013 Nissan Rogue?

To repair OBDII code P2101 in a 2013 Nissan Rogue, you may need to clean or replace the throttle body, replace the throttle position sensor, or repair any damaged wiring or connectors in the Electric Throttle Control System.

7. Can a DIY enthusiast fix OBDII code P2101 in a 2013 Nissan Rogue?

A DIY enthusiast with the necessary tools and knowledge may be able to fix OBDII code P2101 in a 2013 Nissan Rogue, but it is recommended to consult a professional mechanic for proper diagnosis and repair.

8. How much does it cost to repair OBDII code P2101 in a 2013 Nissan Rogue?

The cost to repair OBDII code P2101 in a 2013 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. Are there any preventive measures to avoid OBDII code P2101 in a 2013 Nissan Rogue?

Regular maintenance, such as cleaning the throttle body and inspecting the throttle control system components, can help prevent issues that may trigger OBDII code P2101 in a 2013 Nissan Rogue.

10. How long does it take to repair OBDII code P2101 in a 2013 Nissan Rogue?

The time it takes to repair OBDII code P2101 in a 2013 Nissan Rogue can vary depending on the exact cause of the issue and the availability of parts, but it may take a few hours to a full day for the repair to be completed.