AutoCodes – Nissan – P2101 2010 Nissan Rogue

P2101 2010 Nissan Rogue Code - Electric Throttle Control Performance

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2101 2010 Nissan Rogue indicates Electric Throttle Control Performance.
Common causes: Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,561

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2101 2010 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2101 2010 Nissan Rogue - Electric Throttle Control Performance - AutoCodes.com — P2101 2010 Nissan Rogue Code - Electric Throttle Control Performance

What does this mean?

What are the Possible Causes of the DTC P2101 2010 Nissan Rogue?

Faulty Electric Throttle Control (ETC) Actuator
Electric Throttle Control (ETC) Actuator harness is open or shorted
Electric Throttle Control (ETC) Actuator circuit poor electrical connection

How to Fix the DTC P2101 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2101 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2101 2010 Nissan Rogue code?

Need more information on how to fix the P2101 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2101 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2101 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2101 in a 2010 Nissan Rogue?

When the Electric Throttle Control Performance code P2101 is triggered in a 2010 Nissan Rogue, common symptoms may include reduced engine power, stalling, difficulty accelerating, and the vehicle going into "limp mode."

2. What causes OBDII code P2101 in a 2010 Nissan Rogue?

The Electric Throttle Control Performance code P2101 in a 2010 Nissan Rogue is often caused by issues with the throttle actuator control motor or the throttle position sensor. Other potential causes may include wiring issues, a faulty throttle body, or a problem with the engine control module.

3. How can I diagnose OBDII code P2101 in a 2010 Nissan Rogue?

Diagnosing code P2101 in a 2010 Nissan Rogue typically involves scanning the vehicle's computer for the specific fault code, checking the throttle body and related components for any visible damage or wear, and testing the throttle position sensor and actuator motor for proper operation.

4. Can I drive my 2010 Nissan Rogue with OBDII code P2101?

It is not recommended to drive your 2010 Nissan Rogue when OBDII code P2101 is present. Driving with this code can lead to unsafe driving conditions due to potential loss of engine power or control issues. It is best to address the issue promptly to ensure safe operation of your vehicle.

5. How do I repair OBDII code P2101 in a 2010 Nissan Rogue?

Repairing OBDII code P2101 in a 2010 Nissan Rogue may involve replacing the throttle body, throttle position sensor, or throttle actuator control motor, depending on the specific cause of the issue. It is recommended to consult with a qualified mechanic to accurately diagnose and repair the problem.

6. Is OBDII code P2101 a serious issue in a 2010 Nissan Rogue?

OBDII code P2101 in a 2010 Nissan Rogue should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this code may result in further damage to engine components or unsafe driving conditions.

7. Can a DIY enthusiast fix OBDII code P2101 in a 2010 Nissan Rogue?

While some DIY enthusiasts may have the skills and tools to address OBDII code P2101 in a 2010 Nissan Rogue, it is recommended to seek professional assistance for this type of repair due to the complexity of the throttle control system and the importance of proper diagnosis and repair.

8. How much does it cost to fix OBDII code P2101 in a 2010 Nissan Rogue?

The cost to fix OBDII code P2101 in a 2010 Nissan Rogue can vary depending on the specific cause of the issue, the parts needed for repair, and the labor rates of the repair shop. It is advisable to obtain estimates from different mechanics or dealerships to determine the cost of the repair.

9. What should I do if OBDII code P2101 keeps coming back in my 2010 Nissan Rogue?

If OBDII code P2101 keeps coming back in your 2010 Nissan Rogue after repair attempts, it is important to recheck the components related to the throttle control system for any missed issues, ensure proper installation of new parts, and consider consulting a professional mechanic for further diagnosis and repair.

10. How can I prevent OBDII code P2101 from appearing in my 2010 Nissan Rogue?

To prevent OBDII code P2101 from appearing in your 2010 Nissan Rogue, regular maintenance of the throttle control system is crucial. This includes keeping the throttle body clean, checking for any signs of wear or damage, and addressing any performance issues promptly to avoid triggering the code.