AutoCodes – Nissan – P2100 2009 Nissan Rogue

P2100 2009 Nissan Rogue Code - Throttle Control Motor Relay Circuit Open

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2100 2009 Nissan Rogue indicates Throttle Control Motor Relay Circuit Open.
Common causes: Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,742

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2100 2009 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2100 2009 Nissan Rogue - Throttle Control Motor Relay Circuit Open - AutoCodes.com — P2100 2009 Nissan Rogue Code - Throttle Control Motor Relay Circuit Open

What does this mean?

What are the Possible Causes of the DTC P2100 2009 Nissan Rogue?

Dirty throttle body
Faulty Throttle Actuator Control Motor Relay
Throttle Actuator Control Motor Relay harness is open
Throttle Actuator Control Motor Relay circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2100 2009 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check fuses on the IPDM first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2100 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2100 2009 Nissan Rogue code?

Need more information on how to fix the P2100 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2100 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2100 2009 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2100 in a 2009 Nissan Rogue?

The common symptoms include the check engine light coming on, reduced engine power, and the vehicle going into "limp mode" where it may only operate at a reduced speed.

2. What does the OBDII code P2100 in a 2009 Nissan Rogue mean?

OBDII code P2100 indicates an issue with the throttle control motor relay circuit being open, meaning there is a problem with the relay that controls the throttle motor.

3. What are the possible causes of OBDII code P2100 in a 2009 Nissan Rogue?

Possible causes include a faulty throttle control motor relay, damaged wiring or connectors in the circuit, a malfunctioning throttle control motor, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P2100 in my 2009 Nissan Rogue?

Diagnosis typically involves checking the throttle control motor relay, inspecting the wiring and connectors for damage, testing the throttle control motor, and scanning the ECM for any related error codes.

5. Can I still drive my 2009 Nissan Rogue with OBDII code P2100 present?

It is not recommended to drive your vehicle with OBDII code P2100 present, as it can lead to reduced engine power and potentially unsafe driving conditions. It is best to address the issue promptly.

6. How can I repair OBDII code P2100 in my 2009 Nissan Rogue?

Repairing OBDII code P2100 may involve replacing the faulty throttle control motor relay, repairing damaged wiring or connectors, replacing the throttle control motor if necessary, or addressing any ECM issues.

7. Is it safe to reset the OBDII code P2100 in my 2009 Nissan Rogue using a diagnostic scanner?

Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing OBDII code P2100. It is important to diagnose and repair the problem to prevent it from recurring.

8. Can a DIY enthusiast fix OBDII code P2100 in a 2009 Nissan Rogue?

Depending on the level of expertise, a DIY enthusiast may be able to address simpler causes of OBDII code P2100, such as checking and replacing the throttle control motor relay. However, more complex issues may require professional assistance.

9. How much does it cost to repair OBDII code P2100 in a 2009 Nissan Rogue?

The cost of repairing OBDII code P2100 can vary depending on the cause of the issue, the parts needed for repair, and labor costs. It is recommended to obtain quotes from auto repair shops for an accurate estimate.

10. Will OBDII code P2100 cause permanent damage to my 2009 Nissan Rogue if left untreated?

Leaving OBDII code P2100 untreated can potentially cause further damage to the throttle control system or other engine components over time. It is best to address the issue promptly to prevent any permanent damage.