AutoCodes – Chrysler – P2098 Chrysler

P2098 Chrysler Code - Downstream Fuel Trim System 2 Lean

Quick Answer

The conditions that caused this diagnostic to fail is when the upstream O2 Sensor biased from an exhaust leak, O2 sensor contamination, or some other extreme operating condition. Common causes include Faulty Heated Oxygen Sensor, Heated Oxygen Sensor harness is open or shorted, Heated Oxygen Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2098 Chrysler indicates Downstream Fuel Trim System 2 Lean.
Common causes: Common causes include Faulty Heated Oxygen Sensor, Heated Oxygen Sensor harness is open or shorted, Heated Oxygen Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 30,495

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2098 Chrysler Description

The conditions that caused this diagnostic to fail is when the upstream O2 Sensor biased from an exhaust leak, O2 sensor contamination, or some other extreme operating condition. The downstream O2 sensor is considered to be protected from extreme environments by the catalyst. The Powertrain Control Module monitors the downstream O2 sensor feedback control, called downstream fuel trim, to detect any shift in the upstream O2 sensor target voltage from nominal target voltage. The value of the downstream fuel trim is compared with the lean thresholds. Every time the value exceeds the calibrated threshold, a fail timer is incremented and mass flow through the exhaust is accumulated. If the fail timer and accumulated mas flow exceed the fail thresholds, the test fails and the diagnostic stops running for that trip. If the test fail on consecutive trips, the code will set.

OBDII Code P2098 Chrysler - Downstream Fuel Trim System 2 Lean - AutoCodes.com — P2098 Chrysler Code - Downstream Fuel Trim System 2 Lean

What does this mean?

What are the Possible Causes of the DTC P2098 Chrysler?

Faulty Heated Oxygen Sensor
Heated Oxygen Sensor harness is open or shorted
Heated Oxygen Sensor circuit poor electrical connection
Exhaust leaks
Contaminated Heated Oxygen Sensor

How to Fix the DTC P2098 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Heated Oxygen Sensor, inspect the sensor connector for signs of damage, water ingress, or corrosion

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2098 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2098 Chrysler code?

Need more information on how to fix the P2098 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2098 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.