P2094 Suzuki Code - Exhaust Camshaft Position Actuator Solenoid Control Circuit Low Voltage Bank 2
Quick Answer
The Camshaft Position (CMP) Actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Faulty Exhaust Camshaft Position Actuator Solenoid Bank 2, Exhaust Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted, Exhaust Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2094 Suzuki indicates Exhaust Camshaft Position Actuator Solenoid Control Circuit Low Voltage Bank 2.
- Common causes
- Common causes include Faulty Exhaust Camshaft Position Actuator Solenoid Bank 2, Exhaust Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted, Exhaust Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2094 Suzuki Description
Ignition voltage is supplied directly to the CMP actuator solenoid. The ECM controls the solenoid by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled-up to a voltage. The ECM can determine if the control circuit is open, shorted to ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will set if the ECM detects a short to ground in the CMP actuator solenoid circuits for more than 4 seconds or a cumulative of 50 seconds, when the solenoid is commanded OFF.
What are the Possible Causes of the DTC P2094 Suzuki?
- Faulty Exhaust Camshaft Position Actuator Solenoid Bank 2
- Exhaust Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2094 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2094 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2094 Suzuki code?
Need more information on how to fix the P2094 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2094 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2094 Suzuki Code
1. What are the common symptoms of OBDII code P2094 in a Suzuki?
- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and illuminated Check Engine Light.
2. What can cause the Exhaust Camshaft Position Actuator Solenoid Control Circuit Low Voltage Bank 2 code in a Suzuki?
- Possible causes can include a faulty camshaft position actuator solenoid, wiring issues, low engine oil pressure, or a malfunctioning engine control module (ECM).
3. How can I diagnose the P2094 code in my Suzuki?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the camshaft position actuator solenoid and its wiring, and checking for any related issues in the system.
4. Is it safe to continue driving my Suzuki with the P2094 code present?
- It is not recommended to drive your vehicle with the P2094 code active, as it can lead to further damage to the engine and emissions system.
5. How can I repair the Exhaust Camshaft Position Actuator Solenoid Control Circuit Low Voltage Bank 2 issue in my Suzuki?
- Repair options may include replacing the faulty camshaft position actuator solenoid, repairing or replacing damaged wiring, addressing any underlying oil pressure issues, or reprogramming the ECM.
6. Will resetting the OBDII code P2094 in my Suzuki make the issue go away permanently?
- Simply resetting the code may temporarily clear the Check Engine Light, but it will not fix the underlying problem causing the code to trigger. Proper diagnosis and repair are necessary for a permanent solution.
7. Can a DIY enthusiast fix the P2094 code in a Suzuki at home?
- Depending on the skill level and tools available, some DIY enthusiasts may be able to address simple causes of the P2094 code, such as checking and replacing the camshaft position actuator solenoid. However, more complex issues may require professional assistance.
8. How much does it typically cost to repair the P2094 code in a Suzuki at a mechanic or dealership?
- The cost of repairing the P2094 code can vary depending on the cause of the issue, the labor rates of the service provider, and the cost of any necessary parts. It is advisable to obtain quotes from different sources for comparison.
9. Are there any preventive maintenance steps I can take to avoid the P2094 code in my Suzuki?
- Regular maintenance, such as oil changes, can help prevent issues related to the camshaft position actuator solenoid and other components that may trigger the P2094 code.
10. Can the P2094 code in a Suzuki cause long-term damage if left unresolved?
- Ignoring the P2094 code can potentially lead to more severe engine problems over time, such as reduced performance, increased emissions, and even engine failure. It is best to address the issue promptly.
Discuss the causes and fixes for P2094 Suzuki OBDII Code
Code P2094 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
