P2092 Chevrolet Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2
Quick Answer
The camshaft position actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 2, Intake Camshaft Position Actuator Solenoid Valve Bank 2 harness is open or shorted, Intake Camshaft Position Actuator Solenoid Valve Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2092 Chevrolet indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2.
- Common causes
- Common causes include Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 2, Intake Camshaft Position Actuator Solenoid Valve Bank 2 harness is open or shorted, Intake Camshaft Position Actuator Solenoid Valve Bank 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2092 Chevrolet Description
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled-up to a voltage. The ECM can determine if the control circuit is open, shorted to ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will set when the ECM detects a short to ground in the CMP actuator solenoid circuits for greater than 1 second or a cumulative of 5 seconds, when the solenoid is commanded OFF.
What are the Possible Causes of the DTC P2092 Chevrolet?
- Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 2
- Intake Camshaft Position Actuator Solenoid Valve Bank 2 harness is open or shorted
- Intake Camshaft Position Actuator Solenoid Valve Bank 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2092 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2092 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2092 Chevrolet code?
Need more information on how to fix the P2092 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2092 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2092 Chevrolet Code
1. What does the OBDII code P2092 mean for a Chevrolet?
P2092 indicates a low voltage issue in the intake camshaft position actuator solenoid valve control circuit on Bank 2.
2. What are the common symptoms of P2092 in a Chevrolet?
Symptoms may include rough idling, reduced engine performance, poor fuel efficiency, and an illuminated check engine light.
3. What causes the P2092 code in a Chevrolet?
Common causes include a faulty camshaft actuator solenoid, damaged wiring or connectors, low oil levels, or a failing PCM.
4. How can I diagnose the P2092 code on my Chevrolet?
Start by inspecting the wiring and connectors to the camshaft actuator solenoid, check the solenoid's resistance with a multimeter, and verify proper oil levels.
5. Can low oil levels trigger the P2092 code in a Chevrolet?
Yes, low or dirty oil can affect the operation of the camshaft actuator solenoid and cause the P2092 code.
6. Is it safe to drive a Chevrolet with the P2092 code?
Driving with this code may lead to poor engine performance and potential damage to internal components; it’s best to address it promptly.
7. How do I fix the P2092 code on my Chevrolet?
Repairs may include replacing a faulty camshaft actuator solenoid, fixing damaged wiring, cleaning oil passages, or updating/reprogramming the PCM.
8. How much does it cost to fix the P2092 code on a Chevrolet?
The cost can vary, but replacing the camshaft actuator solenoid typically costs $100-$300, plus labor, depending on the vehicle model and shop rates.
9. Can a bad PCM cause the P2092 code in a Chevrolet?
Yes, although rare, a malfunctioning PCM can cause communication issues leading to the P2092 code.
10. How can I prevent the P2092 code from occurring in my Chevrolet?
Regular oil changes, maintaining proper oil levels, and inspecting electrical connections can help prevent this code.
Discuss the causes and fixes for P2092 Chevrolet OBDII Code
Code P2092 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
