AutoCodes – GMC – P2083 GMC

P2083 GMC Code - Exhaust Gas Temperature Sensor Circuit Intermittent Bank 2 Sensor 1

Quick Answer

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 1, Exhaust Gas Temperature Sensor Bank 2 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2083 GMC indicates Exhaust Gas Temperature Sensor Circuit Intermittent Bank 2 Sensor 1.
Common causes: Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 1, Exhaust Gas Temperature Sensor Bank 2 Sensor 1 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,201

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2083 GMC Description

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it into a voltage and feeds back to the PCM with the voltage signal in order to control engine conditions to effectively reduce emissions. The PCM sets the P2083 OBDII code when the Exhaust Gas Temperature Sensor is out of factory specifications.

OBDII Code P2083 GMC - Exhaust Gas Temperature Sensor Circuit Intermittent Bank 2 Sensor 1 - AutoCodes.com — P2083 GMC Code - Exhaust Gas Temperature Sensor Circuit Intermittent Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2083 GMC?

Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 1
Exhaust Gas Temperature Sensor Bank 2 Sensor 1 harness is open or shorted
Exhaust Gas Temperature Sensor Bank 2 Sensor 1 circuit poor electrical connection
Exhaust leaks
Excessive particulate matter buildup on sensor

How to Fix the DTC P2083 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2083 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2083 GMC code?

Need more information on how to fix the P2083 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2083 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2083 GMC Code

1. What are the common symptoms of OBDII code P2083 GMC?

- Common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.

2. What could cause the OBDII code P2083 GMC to trigger?

- The code is typically triggered by a faulty exhaust gas temperature (EGT) sensor, damaged wiring or connectors, or issues within the sensor circuit.

3. How can I diagnose the cause of OBDII code P2083 GMC?

- Diagnose the code by checking the EGT sensor and its wiring for any visible damage or corrosion. You may also use a multimeter to test the sensor's resistance.

4. Can I continue driving with OBDII code P2083 GMC present?

- It is not recommended to drive with this code active, as it can lead to further engine damage and reduced performance.

5. How can I repair OBDII code P2083 GMC?

- Repair options include replacing the faulty EGT sensor, repairing damaged wiring or connectors, or resetting the code after fixing the underlying issue.

6. Is it necessary to clear the OBDII code P2083 GMC after making repairs?

- Yes, it is important to clear the code using an OBDII scanner after resolving the underlying problem to reset the check engine light.

7. Can a DIY enthusiast fix OBDII code P2083 GMC, or should I seek professional help?

- While some may be able to diagnose and repair the issue themselves, seeking professional help is recommended for accurate diagnosis and proper repair.

8. How much does it cost to repair OBDII code P2083 GMC at a mechanic or dealership?

- Repair costs can vary depending on the exact cause of the issue, but expect to pay for parts and labor, which can range from around $100 to $300 or more.

9. Are there any preventive measures to avoid OBDII code P2083 GMC in the future?

- Regular maintenance checks, timely replacement of sensors, and keeping an eye on warning signs can help prevent the recurrence of this OBDII code.

10. How long does it take to repair OBDII code P2083 GMC?

- The repair time can vary based on the extent of the issue and the availability of parts, but it typically takes a few hours to a day to diagnose and fix the problem.