AutoCodes – Ford – P2072 2012 Ford Fusion

P2072 2012 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2012 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,743

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2012 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2012 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2012 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2012 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2012 Ford Fusion code?

Need more information on how to fix the P2072 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2012 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 in a 2012 Ford Fusion?

- Common symptoms include reduced engine power, rough idling, stalling, and the illumination of the check engine light.

2. What does the OBDII code P2072 on a 2012 Ford Fusion indicate?

- The code P2072 indicates a problem with the Throttle Actuator Control System due to ice blockage.

3. What are the possible causes of code P2072 in a 2012 Ford Fusion?

- The most common cause of P2072 is ice blockage in the throttle actuator control system, which can occur in cold weather conditions.

4. How can I diagnose the ice blockage causing OBDII code P2072 in my 2012 Ford Fusion?

- To diagnose the issue, you may need to visually inspect the throttle actuator and related components for ice accumulation and check for any obstructions.

5. Can I drive my 2012 Ford Fusion with the OBDII code P2072 present?

- It is not recommended to drive the vehicle with code P2072 as it can lead to performance issues and potential safety risks.

6. How can I prevent ice blockage in the Throttle Actuator Control System of my 2012 Ford Fusion?

- To prevent ice blockage, it is advisable to keep the vehicle in a warmer environment or use appropriate cold weather precautions such as a block heater.

7. Is it necessary to replace any parts to fix OBDII code P2072 in a 2012 Ford Fusion?

- In most cases, clearing the ice blockage and ensuring proper insulation are sufficient to resolve the issue without the need for part replacement.

8. Can a DIY enthusiast fix the Throttle Actuator Control System ice blockage causing code P2072 in a 2012 Ford Fusion?

- DIY enthusiasts with automotive repair experience may be able to clear the ice blockage themselves by following proper safety procedures and instructions.

9. How much should I expect to pay for professional repair of OBDII code P2072 in a 2012 Ford Fusion?

- The cost of professional repair for code P2072 can vary depending on the extent of the issue, but it typically ranges from $100 to $300.

10. Are there any long-term implications if the Throttle Actuator Control System ice blockage causing code P2072 is not addressed promptly?

- Failing to address the issue promptly can lead to further damage to the throttle actuator components and potentially result in more expensive repairs down the line.