AutoCodes – Ford – P2072 2008 Ford Fusion

P2072 2008 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2008 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,681

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2008 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2008 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2008 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2008 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2008 Ford Fusion code?

Need more information on how to fix the P2072 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 (Throttle Actuator Control System - Ice Blockage) in a 2008 Ford Fusion?

The common symptoms include reduced engine power, hesitation or stalling when accelerating, and illuminated Check Engine Light.

2. What causes the OBDII code P2072 in a 2008 Ford Fusion?

The code P2072 is typically triggered by ice blockage affecting the throttle actuator control system, leading to restricted airflow and improper operation.

3. How can I diagnose the ice blockage issue triggering code P2072 in my 2008 Ford Fusion?

Inspect the throttle body for any ice build-up, check the intake system for obstructions, and ensure proper functioning of the throttle actuator control motor.

4. Can cold weather or driving in icy conditions cause code P2072 in a 2008 Ford Fusion?

Yes, cold weather conditions, particularly when driving in icy or snowy environments, can contribute to ice blockages affecting the throttle actuator control system.

5. What are some repair tips for resolving OBDII code P2072 in a 2008 Ford Fusion?

To address code P2072, warm up the vehicle in a controlled environment to melt any ice blockage, check and clean the throttle body, and ensure the intake system is free from obstructions.

6. Is it safe to drive my 2008 Ford Fusion with OBDII code P2072 active?

It is not recommended to drive your vehicle with code P2072 active, as it can lead to performance issues and potential safety hazards. Address the issue promptly.

7. Can I reset the Check Engine Light caused by code P2072 in my 2008 Ford Fusion?

You can reset the Check Engine Light using an OBDII scanner after addressing the underlying cause of code P2072, such as removing the ice blockage affecting the throttle actuator control system.

8. Will code P2072 clear on its own in a 2008 Ford Fusion once the ice blockage is removed?

Once the ice blockage affecting the throttle actuator control system is resolved, the code P2072 should clear on its own after a few driving cycles if no further issues are detected.

9. Are there any preventive measures to avoid code P2072 in a 2008 Ford Fusion during winter months?

Taking precautions such as using a vehicle cover, parking in a garage, or using an engine block heater can help prevent ice blockages and reduce the likelihood of triggering code P2072.

10. Should I seek professional help to address OBDII code P2072 in my 2008 Ford Fusion?

If you are not confident in diagnosing or resolving the issue yourself, it is advisable to seek professional help from a qualified mechanic to properly address code P2072 and prevent potential further damage.