AutoCodes – Ford – P2072 2007 Ford Fusion

P2072 2007 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2007 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,831

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2007 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2007 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2007 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2007 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2007 Ford Fusion code?

Need more information on how to fix the P2072 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 in a 2007 Ford Fusion related to Throttle Actuator Control System - Ice Blockage?

- Common symptoms may include reduced engine power, rough idling, stalling, and the illumination of the Check Engine Light.

2. What causes the OBDII code P2072 in a 2007 Ford Fusion indicating Throttle Actuator Control System - Ice Blockage?

- The code P2072 is typically triggered by an ice blockage in the throttle actuator control system, leading to restricted airflow and improper throttle operation.

3. How can I diagnose the Throttle Actuator Control System - Ice Blockage issue causing OBDII code P2072 in my 2007 Ford Fusion?

- Diagnose by inspecting the throttle body for ice buildup, checking the air intake system for obstructions, and ensuring all related components are functioning properly.

4. What are the potential dangers of ignoring the OBDII code P2072 related to Throttle Actuator Control System - Ice Blockage in a 2007 Ford Fusion?

- Ignoring the code can lead to further engine performance issues, reduced fuel efficiency, and potential safety hazards due to unexpected engine behavior.

5. Can I drive my 2007 Ford Fusion with the OBDII code P2072 indicating Throttle Actuator Control System - Ice Blockage?

- It is not recommended to drive your vehicle with this code active, as it can result in unreliable throttle response and potential engine stalling.

6. How can I clear the OBDII code P2072 for Throttle Actuator Control System - Ice Blockage in my 2007 Ford Fusion?

- Clearing the code can be done using an OBDII scanner tool, but it is crucial to address the underlying issue causing the code before clearing it.

7. Are there any DIY repair tips for resolving the Throttle Actuator Control System - Ice Blockage issue triggering OBDII code P2072 in a 2007 Ford Fusion?

- DIY repair tips include thawing any ice blockages, cleaning the throttle body, checking air filters, and ensuring proper sealing of intake components.

8. Is it necessary to replace any parts when dealing with the OBDII code P2072 related to Throttle Actuator Control System - Ice Blockage in a 2007 Ford Fusion?

- Depending on the severity of the issue, parts replacement such as the throttle body or related sensors may be necessary to fully resolve the problem.

9. How can I prevent the recurrence of the Throttle Actuator Control System - Ice Blockage issue triggering OBDII code P2072 in my 2007 Ford Fusion?

- To prevent ice blockages, consider using fuel additives to prevent water accumulation, parking in a warmer location, and ensuring proper maintenance of the intake system.

10. Can extreme weather conditions contribute to the development of the Throttle Actuator Control System - Ice Blockage issue leading to OBDII code P2072 in a 2007 Ford Fusion?

- Yes, extreme cold weather can increase the likelihood of ice forming in the throttle actuator control system, triggering the P2072 fault code.