AutoCodes – Ford – P2070 2012 Ford Fusion

P2070 2012 Ford Fusion Code - Intake Manifold Tuning Valve Stuck Open Bank 1

Quick Answer

The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2070 2012 Ford Fusion indicates Intake Manifold Tuning Valve Stuck Open Bank 1.
Common causes
Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,545
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2070 2012 Ford Fusion Description

The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. The IMTV actuator controls a shutter device attached to the actuator shaft. There is no monitor input to the Powertrain Control Module (PCM) with this system to indicate shutter position.
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
OBDII Code P2070 2012 Ford Fusion - Intake Manifold Tuning Valve Stuck Open Bank 1 - AutoCodes.com
P2070 2012 Ford Fusion Code - Intake Manifold Tuning Valve Stuck Open Bank 1

What are the Possible Causes of the DTC P2070 2012 Ford Fusion?

  • Faulty Intake Manifold Tuning Valve (IMTV)
  • Intake Manifold Tuning Valve (IMTV) harness is open or shorted
  • Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection
  • Faulty Intake Manifold Runner Control (IMRC)
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2070 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2070 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2070 2012 Ford Fusion code?

Need more information on how to fix the P2070 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2070 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2070 2012 Ford Fusion Code

1. What are the common symptoms of OBDII code P2070 on a 2012 Ford Fusion related to the Intake Manifold Tuning Valve Stuck Open Bank 1?

The common symptoms include rough idling, decreased engine performance, and possible stalling.

2. What could cause the Intake Manifold Tuning Valve to be stuck open on Bank 1 in a 2012 Ford Fusion?

Potential causes of this issue may include a faulty tuning valve actuator, carbon buildup in the intake manifold, or wiring/connectivity issues.

3. How can I diagnose the Intake Manifold Tuning Valve Stuck Open Bank 1 issue on my 2012 Ford Fusion?

Diagnosis typically involves using an OBDII scanner to read the specific P2070 trouble code, visually inspecting the tuning valve and related components, and testing the actuator for proper functioning.

4. Can I continue driving my 2012 Ford Fusion with the Intake Manifold Tuning Valve stuck open on Bank 1?

It is not recommended to drive the vehicle with this issue as it can lead to further damage and reduced engine efficiency. Prompt repair is advised.

5. Is it possible to clean the Intake Manifold Tuning Valve to resolve the P2070 code on a 2012 Ford Fusion?

Cleaning the tuning valve and related components may help in cases where carbon buildup is the issue. However, if the valve is faulty or stuck due to mechanical reasons, replacement may be necessary.

6. How difficult is it to replace the Intake Manifold Tuning Valve on a 2012 Ford Fusion?

Replacing the tuning valve typically requires basic mechanical skills and tools. It may involve accessing the intake manifold, disconnecting electrical connectors, and removing the faulty valve for installation of a new one.

7. Are there any recommended maintenance practices to prevent the Intake Manifold Tuning Valve Stuck Open Bank 1 issue in a 2012 Ford Fusion?

Regularly servicing the vehicle, using quality fuel, and following the manufacturer's maintenance schedule can help prevent issues with the intake manifold tuning valve.

8. Can a DIY enthusiast tackle the repair of the Intake Manifold Tuning Valve Stuck Open Bank 1 issue on a 2012 Ford Fusion?

While some DIY enthusiasts may be able to handle the repair, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair to ensure the issue is resolved correctly.

9. Will resetting the OBDII code P2070 on a 2012 Ford Fusion make the issue go away temporarily?

Resetting the code may temporarily turn off the Check Engine light, but it will not fix the underlying problem causing the code. It is crucial to address the root cause to prevent further issues.

10. How much can I expect to pay for repairing the Intake Manifold Tuning Valve Stuck Open Bank 1 issue on a 2012 Ford Fusion?

The cost of repair can vary depending on the specific cause of the problem, labor rates, and the price of parts. It is advisable to obtain quotes from different repair shops for a more accurate estimate.

Discuss the causes and fixes for P2070 2012 Ford Fusion OBDII Code

Code P2070 2012 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play