AutoCodesFord – P2067 2010 Ford Fusion

P2067 2010 Ford Fusion Code - Fuel Level Sensor 'B' Circuit Low

Quick Answer

The Powertrain Control Module (PCM) monitors the Fuel Level Sensor 'B' Circuit. Common causes include Communication link concern, Faulty Instrument Panel Cluster (IPC), Faulty Instrument Cluster (IC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2067 2010 Ford Fusion indicates Fuel Level Sensor 'B' Circuit Low.
Common causes
Common causes include Communication link concern, Faulty Instrument Panel Cluster (IPC), Faulty Instrument Cluster (IC).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,777
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 07, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2067 2010 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the Fuel Level Sensor 'B' Circuit. The PCM sets the OBDII code when the Fuel Level Sensor 'B' Circuit is not to factory specifications.
OBDII Code P2067 2010 Ford Fusion - Fuel Level Sensor 'B' Circuit Low - AutoCodes.com
P2067 2010 Ford Fusion Code - Fuel Level Sensor 'B' Circuit Low

What are the Possible Causes of the DTC P2067 2010 Ford Fusion?

  • Communication link concern
  • Faulty Instrument Panel Cluster (IPC)
  • Faulty Instrument Cluster (IC)
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2067 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2067 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2067 2010 Ford Fusion code?

Need more information on how to fix the P2067 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2067 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2067 2010 Ford Fusion Code

1. What does the OBDII code P2067 mean on a 2010 Ford Fusion?

P2067 indicates a problem with the Fuel Level Sensor 'B' Circuit, specifically that the signal voltage is lower than expected.

2. What are the common symptoms of code P2067 in a 2010 Ford Fusion?

Symptoms may include erratic or inaccurate fuel gauge readings, a "Check Engine" light, or difficulty determining the amount of fuel in the tank.

3. What causes the P2067 code to appear on a 2010 Ford Fusion?

Common causes include a faulty fuel level sensor, damaged wiring or connectors in the fuel sensor circuit, or a malfunctioning fuel pump module.

4. Can I drive my 2010 Ford Fusion with a P2067 code?

While you can usually drive with this code, it’s not recommended, as the fuel gauge may not display accurate fuel levels, potentially leading to running out of gas.

5. How can I diagnose the P2067 code on a 2010 Ford Fusion?

Start by checking the fuel level sensor wiring and connectors for damage or corrosion. Use a multimeter to verify proper voltage and continuity in the sensor circuit.

6. What repairs can fix the P2067 code on a 2010 Ford Fusion?

Repairs may include replacing the faulty fuel level sensor, repairing damaged wiring or connectors, or replacing the fuel pump module if it's integrated with the sensor.

7. How much does it cost to fix the P2067 code on a 2010 Ford Fusion?

Repair costs can range from $150 to $600, depending on whether the fuel level sensor or the entire fuel pump module needs replacement.

8. Can a bad fuel pump cause the P2067 code on a 2010 Ford Fusion?

Yes, if the fuel pump includes an integrated sensor and it malfunctions, it could trigger the P2067 code.

9. Will clearing the code fix the P2067 issue on my 2010 Ford Fusion?

Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.

10. Do I need special tools to fix the P2067 code on a 2010 Ford Fusion?

Basic tools like a multimeter and OBDII scanner are helpful for diagnosis. Replacing the fuel level sensor may require tools to access the fuel tank and pump assembly.

Discuss the causes and fixes for P2067 2010 Ford Fusion OBDII Code

Code P2067 2010 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play