AutoCodes – Generic – P2033

P2033 Code - Exhaust Gas Temperature Sensor 2 Circuit High Voltage

Quick Answer

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P2033 indicates Exhaust Gas Temperature Sensor 2 Circuit High Voltage.
Common causes: Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 34,898

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 03, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2033 Description

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Exhaust temperature sensor 1 is the first exhaust temperature sensor in the exhaust system, the following exhaust temperature sensors are counted upward from the engine outlet to the exhaust system end. The Engine Control Module (ECM) supplies 5 V to the exhaust gas temperature signal circuit and supplies a ground to the low reference circuit. The exhaust gas temperature sensor temperature information is used by the ECM during the exhaust gas particulate filter cleaning process. The Diagnostic Trouble Code (DTC) will ve set when the ECM detects that the exhaust gas temperature sensor is greater than 900 Ω for greater than 2 s.

OBDII Code P2033 - Exhaust Gas Temperature Sensor 2 Circuit High Voltage - AutoCodes.com — P2033 Code - Exhaust Gas Temperature Sensor 2 Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2033?

Faulty Exhaust Gas Temperature Sensor (EGTS) 2
Exhaust Gas Temperature Sensor 2 harness is open or shorted
Exhaust Gas Temperature Sensor 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2033?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

After starting the engine, the exhaust gas temperature sensor temperature should rise steadily, then stabilize after the engine reaches operating temperature. Exhaust gas temperature sensors may fail intermittently while operating under extreme temperatures. Review the Freeze Frame/Failure Records to verify the failure criteria.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2033 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2033 code?

Need more information on how to fix the P2033 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2033 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2033 Chevrolet — Exhaust Gas Temperature Sensor 2 Circuit High Voltage
P2033 Dodge — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 Ford — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 GMC — Exhaust Gas Temperature Sensor 2 Circuit High Voltage
P2033 Lincoln — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 Mercedes-Benz — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 Mercury — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 RAM — Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2033 Code

1. What are the common symptoms of OBDII code P2033?

- Common symptoms include the check engine light turning on, reduced fuel efficiency, and potential engine performance issues.

2. What does OBDII code P2033 indicate?

- OBDII code P2033 indicates a high voltage condition in the Exhaust Gas Temperature Sensor 2 circuit.

3. What are the potential causes of OBDII code P2033?

- Potential causes include a faulty Exhaust Gas Temperature Sensor 2, wiring issues, a damaged sensor harness, or a problem with the engine control module.

4. How can I diagnose OBDII code P2033?

- Diagnosing OBDII code P2033 involves using an OBDII scanner to retrieve the fault code, inspecting the EGT sensor and its wiring for damage, and testing the sensor's resistance and voltage.

5. Can I continue driving with OBDII code P2033?

- It is generally not recommended to continue driving with OBDII code P2033 present, as it can lead to further damage to the vehicle and potentially affect its performance.

6. How can I repair OBDII code P2033?

- Repairing OBDII code P2033 involves replacing the faulty Exhaust Gas Temperature Sensor 2, repairing any damaged wiring or harness, and clearing the fault code with an OBDII scanner.

7. Is it possible to reset OBDII code P2033 without fixing the issue?

- While you can clear the fault code with an OBDII scanner, it is not recommended to reset OBDII code P2033 without addressing the underlying issue, as it may reoccur and cause further problems.

8. Are there any DIY tips for fixing OBDII code P2033?

- DIY tips include checking the sensor connections for corrosion, ensuring the sensor is securely in place, and inspecting the wiring for any visible damage before replacing the sensor if needed.

9. Can a mechanic help with diagnosing and fixing OBDII code P2033?

- Yes, a qualified mechanic can help diagnose the issue using specialized tools, pinpoint the exact cause of the fault, and perform the necessary repairs to clear the code and restore proper functionality.

10. How important is it to address OBDII code P2033 promptly?

- It is important to address OBDII code P2033 promptly to prevent potential damage to the engine, ensure optimal fuel efficiency, and maintain the overall performance of the vehicle.