P2020 2011 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2011 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2011 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2011 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2011 Ford Fusion code?
Need more information on how to fix the P2020 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P2020 in a 2011 Ford Fusion?
- Common symptoms include reduced engine performance, rough idling, and decreased fuel efficiency.
2. What does the OBDII code P2020 for a 2011 Ford Fusion indicate?
- The code refers to an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
3. What are the possible causes of OBDII code P2020 in a 2011 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor, wiring issues, or a problem with the intake manifold itself.
4. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 2 in a 2011 Ford Fusion?
- Use a diagnostic scanner to read the trouble codes, inspect the wiring and connections, and test the sensor's resistance and voltage.
5. Can I drive my 2011 Ford Fusion with OBDII code P2020?
- It is not recommended to drive the vehicle with this code as it can lead to further engine damage and reduced performance.
6. How can I repair OBDII code P2020 on a 2011 Ford Fusion?
- Repair options include replacing the intake manifold runner position sensor, fixing any wiring issues, or cleaning/replacing the intake manifold.
7. Is it possible to reset the OBDII code P2020 in a 2011 Ford Fusion without fixing the underlying issue?
- While you can clear the code temporarily, it is likely to reappear until the root cause of the problem is addressed.
8. Can a DIY enthusiast fix OBDII code P2020 on a 2011 Ford Fusion?
- Depending on your mechanical skills and access to tools, some individuals may be able to address this issue themselves by following repair guides.
9. How long does it typically take to repair OBDII code P2020 on a 2011 Ford Fusion?
- The repair time can vary based on the extent of the issue and your experience level, but it may take anywhere from a few hours to a full day.
10. Will OBDII code P2020 cause the check engine light to illuminate in a 2011 Ford Fusion?
- Yes, this code will trigger the check engine light to come on to alert you to the issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
Discuss the causes and fixes for P2020 2011 Ford Fusion OBDII Code
Code P2020 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
